POWER CAGE CLAMP feedthrough terminal block; with integrated end plate; suitable for Ex e II applications; DIN 35 x 15 rail mount; 2-conductor; 2 AWG; 16 mm wide; light gray.
The WAGO 285 series feed-through terminal block is a light gray, single-level terminal with a built-in end plate, suitable for Ex e II applications. It features side and center marking slots, accommodates one feed-through pole with two wires (one clamp each), and supports a nominal cross-section of 35mm² for wire sizes ranging from 6mm² to 35mm² or #10AWG to #2AWG. The terminal block is rated for a current of 85A and utilizes CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15) with a width of 16mm and is equivalent to model 285992.
- actuation type:
- Operating tool
- color:
- Light gray
- connectable conductor materials:
- Copper
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- PL
- depth from upper edge of din rail:
- 53 mm / 2.087 inch
- design:
- Horizontal type
- fine stranded conductor:
- 6 35 mm / 10 2 AWG
- fire load:
- 0.153 MJ
- flammability class per ul94:
- V0
- height:
- 100 mm / 3.937 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Center/side marking
- mounting type:
- DIN-35 rail
- nominal cross section:
- 35 mm
- packaging type:
- Box
- rated current ex e ii with jumper:
- 85 A
- rated voltage en ex e ii:
- 880 V
- ratings per:
- IEC/EN 60947-7-1
- safety information 1:
- Only suitable for DIN 35 x 15 rail
- solid conductor:
- 6 35 mm / 10 2 AWG
- strip length:
- 23 mm / 0.91 inch
- weight:
- 87.004 g
- width:
- 16 mm / 0.63 inch
- wiring direction:
- Front-entry wiring
