WAGO 289-456
- SKU:
- 289-456
- Condition:
- New
- connection technology 2:
- CAGE CLAMP
- connection type 1:
- System
- connection type 2:
- Field
- contact material connector:
- Au over Ni
- contact resistance max:
- 30 m
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 19 mm / 0.748 inch
- design 2:
- PCB terminal blocks (double-row)
- fine stranded conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.054 MJ
- for mating connector:
- With solder contact
- height:
- 63.5 mm / 2.5 inch
- housing design:
- PCB with mounting feet
- mating direction:
- Vertical
- mounting type:
- DIN-35 rail
- nominal current:
- 0.0416666666666667
- note conductor cross section:
- 12 AWG: THHN, THWN
- note on protection type:
- Notice! Live parts can be easily touched! Protection against direct contact must be provided by the equipment manufacturer, e.g., using a WAGO 709 Series Cover (see Accessories) or a similar cover. The installation guidelines must be observ
- packaging type:
- Box
- performance level:
- 2 / 200 mating cycles
- pluggable connectors:
- D-sub female connector
- pole no:
- 15
- pole number 2:
- 15
- pollution degree:
- 2
- protection type:
- IP00*
- rated surge voltage:
- 0.8 kV
- rated voltage:
- 50 V
- relative humidity:
- ¤ 85% (non-condensing)
- solid conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- strain relief:
- UNC 4-40 stud bolt
- strip length 2:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -20 50 C
- surrounding air temperature storage:
- -40 70 C
- wago connector 2:
- WAGO 236 Series
- weight:
- 37.100 g
- width:
- 53.5 mm / 2.106 inch
Description
Interface module; with solder pin; Female connector; 15-pole; Mating connector with solder connection; Vertical mounting; PCB terminal blocks, double-row; with mounting feet; 2,50 mm²
View AllClose