Fieldbus Coupler CANopen; D-Sub; Extreme.
The WAGO 750 XTR series Fieldbus coupler/head is a remote I/O controller unit designed for extended temperature ranges, supporting up to 64 connections per node and 110 fieldbus nodes on the master connection. It features CANopen communication capability and operates on a 24Vdc supply via system wiring and power jumper. The unit includes a 9-pin D-sub male connector for fieldbus, spring CAGE CLAMP for power supply connections, and a 4-pin male connector for device configuration. It is mounted on a DIN-35 rail with a width of 50.5mm, has an IP20 rating, and is suitable for ambient temperatures ranging from -40°C to +70°C.
- baud rate:
- 10 kBd 1 MBd
- bus segment length max:
- 1000 m
- cob id distribution:
- SDO, standard
- color:
- Dark gray
- communication:
- CANopen
- communication profile:
- DS-301 V4.1
- conformity marking:
- CE
- connection technology communication fieldbus:
- CANopen: 1 x D-sub 9 plug
- connection technology device configuration:
- 1 x Male connector: 4-pole
- connection technology field supply:
- 4 x CAGE CLAMP
- connection technology system supply:
- 2 x CAGE CLAMP
- connection type 1:
- System/field supply
- country of origin sales organisation germany:
- DE
- current carrying capacity power jumper contacts:
- 0.416666666666667
- depth:
- 71.1 mm / 2.799 inch
- depth from upper edge of din rail:
- 63.9 mm / 2.516 inch
- derating:
- Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 +30 %): for -40 +55 C: 24 V (-25 +20 %): for +55 +70 C: 24 V (-25 +10 %): Lower limit in all temperature ranges: 27.5 % (
- device profile:
- DS-401 V2.0 || Limit value monitoring || Edge-triggered PDOs || Configurable response in the event of an error
- emc emission of interference:
- Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3, EN 50121-3-2, EN 50121-4, -5
- emc immunity to interference:
- Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 50121-3-2, -4, -5, EN 60255-26
- exposure to pollutants:
- Per IEC 60068-2-42 and IEC 60068-2-43
- fine stranded conductor:
- 0.25 2.5 mm / 24 14 AWG
- fire load:
- 0.469 MJ
- height:
- 100 mm / 3.937 inch
- housing material:
- Polycarbonate: polyamide 6.6
- input and output fieldbus process image max:
- 512 Byte/512 Byte
- input current typ at nominal load 24 v:
- 500 mA
- mounting position:
- Horizontal (standing/lying): vertical
- mounting type:
- DIN-35 rail
- node id distribution:
- DIP switch
- note:
- Note: Configuration files required (EDS)!
- number of fieldbus nodes on master max:
- 110
- number of modules per node max:
- 64
- number of outgoing power jumper contacts:
- 2
- number of pdos:
- 32 Tx / 32 Rx
- number of sdos:
- 2 SDO servers
- operating altitude:
- Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
- other canopen features:
- NMT slave || Minimum boot-up || Variable PDO mapping || Emergency message || Life guarding || Empty module configuration
- packaging type:
- Box
- permissible h2s contaminant concentration at a relative humidity 75:
- 10 ppm
- permissible so2 contaminant concentration at a relative humidity 75:
- 25 ppm
- pollution degree 5:
- 2 per IEC 61131-2
- power consumption 5 v system supply:
- 350 mA
- power supply efficiency typ at nominal load 24 v:
- 0.9
- protection type:
- IP20
- rated surge voltage:
- 1 kV
- ratings per:
- IEC/EN 60664-1
- relative humidity with condensation:
- Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
- relative humidity without condensation:
- 0.95
- shock resistance:
- Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks: 25g/6 ms/1,000 shocks), EN 50155, EN 61373
- solid conductor:
- 0.25 2.5 mm / 24 14 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- supply voltage field:
- 24 VDC: Power supply via pluggable connector (CAGE CLAMP connection): Transmission via power jumper contacts: Derating must be observed!
- supply voltage system:
- 24 VDC: via pluggable connector (CAGE CLAMP connection): Derating must be observed!
- surrounding air temperature operation:
- -40 70 C
- surrounding air temperature storage:
- -40 85 C
- total current system supply:
- 1650 mA
- transmission medium:
- Shielded Cu cable 3 x 0.25 mm
- vibration resistance:
- Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3, EN 50155: EN 61373
- weight:
- 176.500 g
- width:
- 50.5 mm / 1.988 inch
