Wago 750-633/040-000 Marking strips, for Smart Printer permanent adhesive, yellow
SKU:
750-633/040-000
UPC:
MPN:
Condition:
New
color:
Blue
conformity marking:
CE
connection technology inputs outputs:
16 x CAGE CLAMP
connection type 1:
Inputs/outputs
counter depth:
32 bits
country of origin sales organisation germany:
DE
current carrying capacity power jumper contacts:
0.0416666666666667
data width:
1 x 32-bit data, 1 x 8-bit status/diagnostics
depth:
67.8 mm / 2.669 inch
depth from upper edge of din rail:
60.6 mm / 2.386 inch
emc emission of interference:
Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3
emc immunity to interference:
Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
ex guideline:
EN/IEC 60079-0, -7, -11
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.25 2.5 mm / 24 14 AWG
fire load:
1.249 MJ
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
input filter:
10 s
input resistance max:
1000
internal resistance ri:
285
intrinsic safety ex i:
Yes
isolation:
300 VAC system/field
marking:
ATEX/IECEx: II 3 (1) G Ex ec [ia Ga] IIC T4 Gc: II (1) D [Ex ia Da] IIIC: I (M1) [Ex ia Ma] I
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
note:
The up/down counter must only be operated via 24 VDC Ex i XTR power supply (750-606/040-000)!General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 XTR manuals!
number of counters:
1
number of digital outputs:
1
number of incoming power jumper contacts:
2
number of outgoing power jumper contacts:
2
open circuit voltage:
8.2 V
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
output voltage:
24 VDC
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
25 mA
power consumption field supply module with no external load:
31 mA
power consumption pmax:
2.2 W (sensor load: 8.2 mA + actuator load: 45 mA)
power loss pl:
1.7 W (sensor load: 8.2 mA + actuator load: 45 mA)
protection type:
IP20
rated surge voltage:
1 kV: Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)
reactances note:
Reactances without accounting for the concurrence of L and C
reactances of ex ia i inputs:
Lo = 100 mH: Co = 35 F
reactances of ex ia i output:
Lo = 33 mH: Co = 3.849 F
reactances of ex ia iia inputs:
Lo = 100 mH: Co = 36 F
reactances of ex ia iia output:
Lo = 23 mH: Co = 2.369 F
reactances of ex ia iib inputs:
Lo = 100 mH: Co = 9 F
reactances of ex ia iib output:
Lo = 13 mH: Co = 0.719 F
reactances of ex ia iic inputs:
Lo = 100 mH: Co = 1.41 F
reactances of ex ia iic output:
Lo = 1.3 mH: Co = 0.091 F
relative humidity with condensation:
Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
relative humidity without condensation:
0.95
safety data input:
Uo = 12 V: Io = 13.3 mA: Po = 40.4 mW: Linear characteristic curve
safety data output:
Uo = 26.8 V: Io = 96.69 mA: Po = 674.83 mW: Linear characteristic curve
sensor supply uv:
8.2 V
shock resistance:
Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks: 25g/6 ms/1,000 shocks), EN 61373
short circuit current:
8.2 mA (+/- 5 %)
signal current 0:
1.2 mA
signal current 1:
2.1 mA
solid conductor:
0.25 2.5 mm / 24 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC: (Ex i XTR power supply: UO = max. 26.8 V): via power jumper contacts (power supply via blade contact: transmission via spring contact)
supply voltage system:
5 VDC: via data contacts
surrounding air temperature operation:
-40 70 C
surrounding air temperature storage:
-40 85 C
switching frequency:
20 Hz 50 kHz
switching hysteresis:
0.2 mA
vibration resistance:
Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3
