WAGO 750-806

(No reviews yet) Write a Review
SKU:
750-806
MPN:
750-806
Condition:
New
baud rate:
500 kBd (125 kBd, 250 kBd, 500 kBd)
bus segment length max:
500 m
color:
Light gray
communication:
DeviceNet
configuration options:
EDS device description file || WAGO-I/O-CHECK
conformity marking:
CE
connection technology communication fieldbus:
DeviceNet: 1 x Male connector: 5-pole
connection technology device configuration:
1 x Male connector: 4-pole
connection technology field supply:
6 x CAGE CLAMP
connection technology system supply:
2 x CAGE CLAMP
connection type 1:
System/field supply
country of origin sales organisation germany:
DE
cpu:
16 bits
current carrying capacity power jumper contacts:
0.416666666666667
cycle time:
< 3 ms for 1000 bit instructions/ 256 digital I/O
data memory:
64 kByte
depth:
71.1 mm / 2.799 inch
depth from upper edge of din rail:
63.9 mm / 2.516 inch
devicenet features:
Polled I/O Message Connection || Strobed I/O Message Connection || Change of State || Cyclic Message Connection || UCMM using function blocks || DeviceNet master can be programmed
emc emission of interference:
Per EN 61000-6-4, marine applications
emc immunity to interference:
Per EN 61000-6-2, marine applications
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.08 2.5 mm / 28 14 AWG
fire load:
2.587 MJ
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
indicators:
LED (OVERF) red: device error: LED (RUN) green: Device status: LED (BUS OFF) red: Network error : LED (CONNECT) green: Network status: LED (I/O, USR) red/green/orange: Local data bus status, status programmable by user: LED (A, B) green: System power
input and output fieldbus process image max:
1024 Byte/1024 Byte
input current typ at nominal load 24 v:
500 mA
input current via devicenet interface at 11 v:
120 mA
isolation:
500 V system/field
memory for fieldbus input variables max:
512 Byte
memory for fieldbus output variables max:
512 Byte
mounting position:
Any
mounting type:
DIN-35 rail
non volatile software memory:
8 kB
note:
Note: Configuration files required (EDS)!The EDS files can be downloaded for free at www.wago.com.
number of fieldbus nodes on master max:
64
number of i o points:
6000
number of modules per node max:
64
number of outgoing power jumper contacts:
3
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
350 mA
power supply efficiency typ at nominal load 24 v:
0.87
program memory:
128 kByte
programming environment:
WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
programming languages per iec 61131 3:
Instruction List (IL) || Ladder Diagram (LD) || Function Block Diagram (FBD), Continuous Function Chart (CFC) || Structured Text (ST) || Sequential Function Chart (SFC)
protection type:
IP20
relative humidity without condensation:
0.95
shock resistance:
15g per IEC 60068-2-27
solid conductor:
0.08 2.5 mm / 28 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC (-25 +30 %): via power jumper contacts
supply voltage system:
24 VDC (-25 +30 %): via pluggable connector (CAGE CLAMP connection)
surrounding air temperature operation:
0 55 C
surrounding air temperature storage:
-25 85 C
total current system supply:
1650 mA
transmission medium communication fieldbus:
Shielded Cu cable: Remote bus cable: 2 x 0.82 mm + 2 x 1.7 mm: Drop cable: 2 x 0.2 mm + 2 x 0.32 mm
vibration resistance:
4g per IEC 60068-2-6
visualization:
Without
weight:
200.000 g
width:
50.5 mm / 1.988 inch
  • Wago 750-806
  • Wago 750-806
  • Wago 750-806
$739.20