LED (ON, LINK, TxD/RxD) green: Fieldbus initialization, send, receive: LED (CRC) red: Checksum error: LED (I/O) red/green/orange: Local data bus status: LED (A, B) green: System power supply status, field supply
input and output fieldbus process image max:
1024 Byte/1024 Byte
input current typ at nominal load 24 v:
500 mA
isolation:
500 V system/field
memory for fieldbus input variables max:
512 Byte
memory for fieldbus output variables max:
512 Byte
mounting position:
Any
mounting type:
DIN-35 rail
non volatile software memory:
8 kB
number of fieldbus nodes on master max:
247
number of i o points:
6000
number of modules per node max:
64
number of outgoing power jumper contacts:
3
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
350 mA
power supply efficiency typ at nominal load 24 v:
0.87
program memory:
32 kByte
programming environment:
WAGO-I/O-PRO V2.3 (based on CODESYS V2.3)
programming languages per iec 61131 3:
Instruction List (IL) || Ladder Diagram (LD) || Function Block Diagram (FBD), Continuous Function Chart (CFC) || Structured Text (ST) || Sequential Function Chart (SFC)
protection type:
IP20
relative humidity with condensation:
Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of 20 to +60 C (except for wind-driven precipitation, water and ice formation)