current carrying capacity power jumper contacts note:
Requires external fusing (12.5 A fast) of the field supply
depth:
75 mm / 2.953 inch
emc emission of interference:
Per EN 61000-6-3, -4
emc immunity to interference:
Per EN 61000-6-1, -2
fine stranded conductor:
0.25 2.5 mm / 22 14 AWG
fire load:
0.456 MJ
height:
105 mm / 4.134 inch
indicators:
LED (DS, RN, ER) red/green/orange: Device status, EtherCAT RUN, EtherCAT error: LED (EC) red/blue/magenta: Error code: LED (S, F) gree: System supply, field supply
input and output internal process image max:
1000 Worte/1000 Worte
isolation field system:
Min. 1000 VDC (1 min): per EN/UL 61010-2-201
marking:
Cl I, Div 2, Group A, B, C, D, T4
mounting position:
Horizontal, typical for control cabinets (nominal mounting position): horizontal (floor mounting position): standing (vertical at bottom)
mounting type:
DIN-35 rail
note conductor cross section:
Insulated ferrule: 1.5 mm (max.)
number of modules per node max:
250
number of outgoing power jumper contacts:
2
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 3000 m (0.5 K/100 m)
pollution degree 5:
2
power consumption system supply power supply at max local bus supply:
900 mA
power consumption system supply power supply without local bus supply:
160 mA
power loss pl:
4.3 W
power supply efficiency typ at nominal load 24 v:
0.95
protection type:
IP20
relative humidity without condensation:
0.95
solid conductor:
0.25 2.5 mm / 22 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC, SELV (-25 +30 %): UF
supply voltage system:
24 VDC, SELV (-25 +30 %): US
surrounding air temperature operation:
-25 60 C (Horizontal, typical control cabinet installation: 25 +50 C, other mounting positions)
surrounding air temperature storage:
-40 85 C
temperature range of connecting cable per ul 61010 2 201 min:
85 C
temperature range of the connecting cable according to en 61010 2 201:
Double potential terminal block; with push-button; 1.5 mm²; with double, center marker slot; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 1,00 mm²; gray. The WAGO 2201 TOPJOB S series...
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 4-conductor; 4.2 mm wide; blue. The WAGO 2201 TOPJOB S series neutral-through terminal block is a blue, 1-deck/level component with...
TOPJOBS ground terminal block with Push-buttons; rail mount; 2-conductor; 4.2 mm wide; green-yellow. The WAGO 2201 TOPJOB S series ground/earthing terminal block is a green-yellow, single-deck unit...
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 3-conductor; 4.2 mm wide; gray. The WAGO 2201 TOPJOB S series feed-through terminal block is a gray, single-deck unit with side and...
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 4-conductor; 4.2 mm wide; gray. The WAGO 2201 TOPJOB S series feed-through terminal block is a gray, single-deck unit with side and...
1-conductor/1-pin double deck receptacle terminal block; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; gray. The WAGO 2022 X-COM S series is a gray, double-deck feed-through...
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 2-conductor; 4.2 mm wide; gray. The WAGO 2201 TOPJOB S series feed-through terminal block is a gray, single-deck unit with side and...
TOPJOBS feedthrough terminal block with Push-buttons; rail mount; 2-conductor; 4.2 mm wide; blue. The WAGO 2201 TOPJOB S series neutral-through terminal block is a blue, single-deck component...