Description
| Description | Primary switch mode power supplies; EPSITRON ; ECO Power; 1-phase; 24 VDC; 1.25A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Remarks | Item description:
Output current Io: 1.25 A at 24 VDC and 110 240 VAC 1 A at 24 VDC and 100 240 VAC External fuse: Circuit breakers B6, B10; An external DC fuse is required for the DC input voltage Overload behavior: Constant power (in overload range: 1.05 ... 1.4 x Io); shutdown and automatic restart in the event of a short circuit | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Item properties | Miscellaneous
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Allow approximately 5 business days to ship. Need it sooner Contact us for assistance.
Additional Information
conformity marking: |
CE |
connection technology: |
CAGE CLAMP |
connection type 1: |
Input/output |
control deviation: |
¤ 1 % |
country of origin sales organisation germany: |
CN |
default setting: |
DC 24 V |
depth from upper edge of din rail: |
99 mm / 3.898 inch |
discharge current: |
¤ 1.5 mA |
efficiency typ: |
87 % (230 VAC: 1.25 ADC) |
fine stranded conductor: |
0.08 2.5 mm / 28 12 AWG |
fire load: |
0.000 MJ |
height: |
90 mm / 3.543 inch |
input current ii: |
¤ 0.3 A (230 VAC): ¤ 0.6 A (115 VAC) |
input voltage range: |
AC 90 264 V: DC 125 375 V |
inrush current: |
¤ 18 A |
internal fuse: |
F 1 A / 250 VAC |
isolation voltage pri gnd: |
DC 2.2 kV |
isolation voltage pri sec: |
DC 4.242 kV |
isolation voltage sec gnd: |
DC 0.7 kV |
mains failure hold up time: |
10 ms (230 VAC) |
mounting type: |
DIN-35 rail || Screw mount |
mtbf: |
> 300,000 h (per IEC 61709) |
nominal input voltage ui nom: |
1 x AC 100 240 V |
nominal mains frequency range: |
47 63 Hz: 0 Hz |
nominal output current io nom: |
1.25 A (24 VDC: 110 240 VAC): 1 A (24 VDC: 100 240 VAC) |
nominal output power: |
30 W |
nominal output voltage uo nom: |
DC 24 V (SELV) |
note conductor cross section: |
12 AWG: THHN, THWN |
open circuit proof: |
Yes |
operation status indicator: |
Green LED (Uo) |
output voltage range: |
DC 22 26 V (adjustable) |
overload behavior: |
Constant power (in overload range: 1.05 1.4 x Io nom): Shutdown and automatic restart in the event of a short circuit |
overvoltage category: |
II |
packaging type: |
Box |
parallel operation: |
Yes |
phases: |
1 |
pollution degree: |
2 |
power factor correction pfc: |
Passive |
power loss pl: |
¤ 6 W (230 VAC: 24 VDC: 1.25 A) |
protection class: |
I |
protection type: |
IP20 (per EN 60529) |
recommended backup fusing: |
Circuit breaker: B6, B10 |
relative humidity: |
10 95 % (no condensation permissible) |
required backup fusing: |
An external DC fuse is required for the DC input voltage. |
residual ripple: |
¤ 200 mV (Peak-to-peak) |
resistance to reverse feed: |
¤ DC 30 V |
series operation: |
Yes, for 2 devices of the same type |
short circuit protected: |
Yes |
signaling: |
1 x LED DC OK (green) |
solid conductor: |
0.08 2.5 mm / 28 12 AWG |
standards specifications: |
EN 61204-3 || EN 60335-1 || EN 62368-1 || UL 60950-1 || UL 508 |
strip length: |
6 7 mm / 0.24 0.28 inch |
surrounding air temperature operation: |
-20 60 C |
surrounding air temperature storage: |
-25 75 C |
transient suppression primary: |
Varistor |
wago connector: |
WAGO 236 Series |
weight: |
300.000 g |
width: |
30 mm / 1.181 inch |
