Wago

WAGO 788-303

(No reviews yet) Write a Review
SKU:
788-303
MPN:
788-303
Condition:
New
bounce time typ:
6 ms
color:
Gray
connection technology:
Push-in CAGE CLAMP
contact material relay:
AgNi 90/10
country of origin sales organisation germany:
CN
depth from upper edge of din rail:
54 mm / 2.126 inch
dielectric strength control load circuit ac 1 min:
5 kVrms
dielectric strength open contact ac 1 min:
1 kVrms
drop out time typ:
6 ms
electrical life no resistive load 23 c:
30 x 103 switching operations
fine stranded conductor:
0.34 2.5 mm / 22 14 AWG
fire load:
0.670 MJ
height:
86 mm / 3.386 inch
input voltage range:
10 %
inrush current resistive max:
(AC) 30 A / 4 s
limiting continuous current:
16 A
mechanical life:
30 x 106 switching operations
mounting type:
DIN-35 rail
nominal input current at un:
36 mA
nominal input voltage un:
DC 12 V
note:
Reinforced insulation between coil and contactsTo protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
number of changeover switchover contacts:
1
packaging type:
Box
pollution degree:
3
processing temperature:
-25 +50 C
protection type:
IP20
pull in time typ:
8 ms
rated surge voltage:
4 kV
rated voltage:
250 V
recommended minimum load:
12 V / 10 mA
safety information 1:
A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
solid conductor:
0.34 2.5 mm / 22 14 AWG
standards specifications:
EN 61010-2-201 || EN 61810-1 || EN 61373 || UL 508 (max. 10 A)
status indicator:
Red LED
strip length:
9 10 mm / 0.35 0.39 inch
surrounding air operating temperature for ul:
-40 50 C
surrounding air temperature operation at un:
-40 70 C
surrounding air temperature storage:
-40 70 C
switching capacity:
AC-15: 6 A / AC 250 V: DC-13: 2 A / DC 24 V
switching frequency with without load max:
6 min-1 / 1200 min-1
switching power resistive max:
AC 4000 VA: DC (see load limit curve)
switching voltage max:
AC 250 V
wago basic relay:
788-150
weight:
45.860 g
width:
15 mm / 0.591 inch
  • Wago 788-303
  • Wago 788-303
  • Wago 788-303
  • Wago 788-303
$17.19

Description

Relay socket with relay and status indicator; each 1 changeover contact (1 u); 12 VDC

  • Reinforced insulation between coil and contacts
  • A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
  • To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
.

The WAGO 788 series plug-in relay assembly features a single-pole, single-throw (SPDT) contact with a control voltage range of 10.8-13.2Vdc and a nominal voltage of 12Vdc. It has an electromechanical design with a rated current of 16A continuous, 6A at 250Vac (AC-15), and 2A at 24Vdc (DC-13). The relay includes a red LED indicator, Push-in CAGE CLAMP connections, and is designed for DIN-35 rail mounting with a 15mm width. It has IP20 protection and uses Silver-Nickel (AgNi 90/10) contacts, equivalent to model 788303.

View AllClose