Relay module; Nominal input voltage: 230 V AC/DC; 1 changeover contact; Limiting continuous current: 6 A; with gold contacts; Yellow status indicator; Module width: 6 mm; 2,50 mm²; gray.
The WAGO 857 series plug-in relay assembly features a socket base and ejector with a yellow LED indicator. It is a single-pole (1P) relay with a control voltage range of 184-253Vac (230Vac nominal; 50/60Hz; 0.8...1.1 x Uc) and 184-253Vdc (230Vdc nominal; 0.8...1.1 x Uc). The relay has a single pole double throw (SPDT) contact configuration and an electromechanical design. It supports a rated current of 50mA (30Vdc; DC-13) and uses Push-in CAGE CLAMP connections. The relay is designed for DIN-35 rail mounting with a 6mm width and has an IP20 protection rating. The contacts are made of hard gold-plated silver-nickel (AgNi + Au) material, and it is equivalent to the 857368 model.
- bounce time typ:
- 3.5 ms
- circuit type:
- Mains circuits
- color:
- Gray
- connection technology:
- Push-in CAGE CLAMP
- contact material relay:
- AgNi + Au
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 81 mm / 3.189 inch
- dielectric strength control load circuit ac 1 min:
- 3.51 kVrms
- dielectric strength open contact ac 1 min:
- 1 kVrms
- drop out time typ:
- 25 ms
- electrical life no resistive load 23 c:
- 50 x 103 switching operations
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.647 MJ
- height:
- 94 mm / 3.701 inch
- input voltage range:
- -20 +10 %
- inrush current resistive max:
- (AC) 20 A / 0.02 s
- insulation type between adjacent devices of the the same type:
- Reinforced insulation (safe isolation)
- insulation type control load circuit:
- Reinforced insulation (safe isolation)
- limiting continuous current:
- 0.25
- mechanical life:
- 5 x 106 switching operations
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 3.5 mA
- nominal input voltage un:
- AC/DC 230 V
- note:
- To prevent damaging the gold layer, 30 V switching voltages and 50 mA currents must not be exceeded. Higher switching power eventually evaporates the gold layer. The resulting deposits in the housing may reduce service life.To protect the relay coils
- number of changeover switchover contacts:
- 1
- operating altitude max:
- 2000 m
- overvoltage category:
- III
- packaging type:
- Box
- pollution degree:
- 2
- processing temperature:
- -25 +50 C
- protection type:
- IP20
- pull in time typ:
- 15 ms
- rated surge voltage:
- 4 kV
- rated voltage:
- 300 V
- recommended minimum load:
- 1 V / 1 mA / 1 mW
- relative humidity:
- 5 95 % (no condensation permissible)
- solid conductor:
- 0.34 2.5 mm / 22 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61810-1 || EN 61373 || UL 508 || GL || ATEX || IEC Ex
- status indicator:
- Yellow LED
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation at un:
- -40 60 C
- surrounding air temperature storage:
- -40 70 C
- switching capacity:
- AC-15: 3 A / AC 250 V: DC-13: 2 A / DC 24 V
- switching frequency with without load max:
- 6 min-1 / 180 min-1
- switching power resistive max:
- AC 1500 VA: DC (see load limit curve)
- switching voltage max:
- AC 250 V
- wago basic relay:
- 857-157
- weight:
- 30.277 g
- width:
- 6 mm / 0.236 inch
