Optocoupler module; Nominal input voltage: 24 VDC; Output voltage range: 3
30 VDC; Limiting continuous current: 3 A; 2-wire connection; Module width: 6 mm; gray.
The WAGO 859 series fixed-type solid-state relay (SSR) features a yellow LED indicator and supports a 2-wire connection. It is a single-pole, single-phase relay with a control voltage range of 12.5-30Vdc (nominally 24Vdc) and an output rated voltage of 3Vdc-30Vdc (nominally 24Vdc). The relay can handle a continuous rated current of 4.8A and utilizes CAGE CLAMP connections for secure wiring. It is designed for DIN-35 rail mounting with a width of 6mm and is equivalent to model 859730.
- circuit type:
- 2-wire connection
- color:
- Gray
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- CN
- depth from upper edge of din rail:
- 56 mm / 2.205 inch
- dielectric strength control load circuit ac 1 min:
- 2.5 kVrms
- drop out time t10 90:
- 15 s
- fine stranded conductor:
- 0.2 2.5 mm / 24 14 AWG
- fine stranded conductor with insulated ferrule:
- 0.2 1.5 mm / 24 14 AWG
- fine stranded conductor with uninsulated ferrule:
- 0.2 1.5 mm / 24 14 AWG
- fire load:
- 0.313 MJ
- height:
- 91 mm / 3.583 inch
- input voltage range high level:
- DC 12.5 30 V
- input voltage range low level:
- DC 0 7.5 V
- insulation type between adjacent devices of the the same type:
- Reinforced insulation (safe isolation)
- insulation type control load circuit:
- Basic insulation
- insulation type to any type of adjacent devices:
- Basic insulation
- leakage current at rated voltage:
- ¤ 45 A
- limiting continuous current:
- 4.8 A
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 15 mA
- nominal input voltage un:
- DC 24 V
- nominal output voltage:
- DC 24 V
- note:
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
- note on protection type:
- When mated or with end plate 859-525
- operating altitude max:
- 2000 m
- output voltage range:
- DC 3 30 V
- overvoltage category:
- II
- packaging type:
- Box
- peak output current:
- 25 A
- pollution degree:
- 2
- processing temperature:
- -25 +50 C
- protection type:
- IP20
- rated voltage:
- 300 V
- relative humidity:
- 5 95 % (non-condensing)
- rise time t10 90:
- 12 s
- solid conductor:
- 0.2 2.5 mm / 24 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || UL 508
- status indicator:
- Yellow LED
- strip length:
- 5 6 mm / 0.2 0.24 inch
- surrounding air operating temperature for ul:
- -40 40 C
- surrounding air temperature operation at un:
- -40 70 C
- surrounding air temperature storage:
- -25 70 C
- switching frequency:
- ¤ 2.3 kHz
- turn off time:
- ¤ 1 ms
- turn on time:
- ¤ 20 s
- voltage drop at output max:
- ¤ DC 0.4 V
- weight:
- 18.468 g
- width:
- 6 mm / 0.236 inch
