DIELECTRIC STRENGTH CONTROL LOAD CIRCUIT AC 1 MIN:
3 kVrms
FINE STRANDED CONDUCTOR:
0.08 ¢¦ 2.5 mm² / 28 ¢¦ 14 AWG
FINE STRANDED CONDUCTOR WITH INSULATED FERRULE:
0.08 ¢¦ 1.5 mm² / 28 ¢¦ 16 AWG
FINE STRANDED CONDUCTOR WITH UNINSULATED FERRULE:
0.2 ¢¦ 1.5 mm² / 24 ¢¦ 14 AWG
FIRE LOAD:
0.313 MJ
HEIGHT:
91 mm / 3.583 inches
INPUT VOLTAGE RANGE HIGH LEVEL:
DC 100 ¢¦ 120 V
INPUT VOLTAGE RANGE LOW LEVEL:
DC 0 ¢¦ 60 V
INSULATION TYPE BETWEEN ADJACENT DEVICES OF THE SAME TYPE:
Reinforced insulation (safe isolation)
INSULATION TYPE CONTROL LOAD CIRCUIT:
Reinforced insulation (safe isolation)
LIMITING CONTINUOUS CURRENT:
0.125
MEASUREMENT ERROR DEVIATION MAX FROM THE UPPER RANGE VALUE:
MEASUREMENT ERROR DEVIATION MAX OF THE UPPER RANGE VALUE 2=
MISMATING PROTECTION:
MOUNTING NOTE=
MOUNTING POSITION:
Horizontal (standing/lying)
MOUNTING TYPE:
DIN-35 rail
NOMINAL INPUT CURRENT AT UN:
3.8 mA
NOMINAL INPUT VOLTAGE UN:
DC 110 V
NOMINAL OUTPUT VOLTAGE:
DC 24 V
NOTE:
Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
NOTE ON PROTECTION TYPE:
In connected state or when using 859-525 end plate
OPERATING ALTITUDE MAX:
2000 m
OUTPUT VOLTAGE RANGE:
DC 3 ¢¦ 30 V
OVERVOLTAGE CATEGORY:
II
PEAK OUTPUT CURRENT:
25 A
POLLUTION DEGREE:
2
PROCESSING TEMPERATURE:
-25 ¢¦ +50 °C
PRODUCT GROUP CODE:
6
PROTECTION TYPE:
IP20
RATED VOLTAGE:
150 V
RELATIVE HUMIDITY:
5 ¢¦ 95 % (no condensation permissible)
SOLID CONDUCTOR:
0.08 ¢¦ 2.5 mm² / 28 ¢¦ 14 AWG
STANDARDS SPECIFICATIONS:
EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || UL 508
