4-conductor chassis-mount terminal strip; without ground contact; PE-N-L1-L2-L3; 5-pole; for 3 mm ø screw and nut; 4 mm²; 4,00 mm²; black.
The WAGO 862 series is a black chassis-mount terminal strip featuring feed-through, neutral-through, and ground/earthing connections with a single deck and buttons on both sides. It is marked "PE-N-L1-L2-L3" and includes three feed-through poles, a neutral-through, and a protective-earth connection (3P+N+PE). The terminal strip accommodates 20 wires (10 push-in + 10 push-in) for wire sizes ranging from 0.5mm² to 4mm² (#20AWG to #12AWG) and supports a rated current of 32A. It utilizes Push-in CAGE CLAMP spring connections and is mounted using a 3mm screw and nut, equivalent to model 8621505.
- connection technology 2:
- CAGE CLAMP
- connection type 1:
- System
- connection type 2:
- Field
- contact material connector:
- Au over Ni
- contact resistance max:
- 30 m
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 34 mm / 1.339 inch
- design 2:
- PCB terminal blocks (double-row)
- fine stranded conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.586 MJ
- for mating connector:
- With solder contact
- height:
- 85 mm / 3.346 inch
- housing design:
- Mounting carrier
- mating direction:
- Vertical
- mounting type:
- DIN-35 rail
- nominal current:
- 0.0833333333333333
- note conductor cross section:
- 12 AWG: THHN, THWN
- operating altitude max:
- 2000 m
- operating voltage:
- ¤ AC/DC 125 V
- packaging type:
- Box
- performance level:
- 2 / 200 mating cycles
- pluggable connectors:
- D-sub female connector
- pole no:
- 9
- pole number 2:
- 10
- pollution degree:
- 2
- protection type:
- IP20
- rated surge voltage:
- 0.8 kV
- rated voltage:
- 125 V
- relative humidity:
- ¤ 85% (non-condensing)
- solid conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- specialty functions:
- With shield connection
- standards specifications:
- EN 61010-2-201
- strain relief:
- UNC 4-40 stud bolt
- strip length 2:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -25 70 C (> 50 C max. 1 A)
- surrounding air temperature storage:
- -40 70 C
- wago connector 2:
- WAGO 236 Series
- weight:
- 47.003 g
- width:
- 33 mm / 1.299 inch
