Description
2-conductor through terminal block; 2.5 mm®; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP
View AllClose
Electrical Data
- Rated voltage (III / 3): 500 V
- Rated impulse voltage (III / 3): 6 kV
- Rated current: 24 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Solid conductor: 0.08 2.5 mm / 28 12 AWG
- Fine-stranded conductor: 0.08 4 mm / 28 12 AWG
- Strip length: 6 7 mm / 0.24 0.28 inch
- Total number of connection points: 2
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
Geometrical Data
- Width: 5 mm / 0.197 inch
- Height from upper-edge of DIN-35 rail: 27.5 mm / 1.083 inch
- Depth: 44.5 mm / 1.752 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Side marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.080 MJ
- Weight: 4.303 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4044918478250
- Customs Tariff No.: 85369010000
The WAGO 870 X-COM series feed-through terminal block is a gray, single-deck unit with side and center marking slots, designed for one feed-through pole and two wires using CAGE CLAMP spring connections. It accommodates wire sizes from 0.08mm² to 4mm² or #28AWG to #12AWG, supports a rated current of 24A, and mounts on a DIN-35 rail with dimensions of 35 x 15 or 35 x 7.5 mm, with a width of 5mm. This terminal block is equivalent to model 870901.
