Zebra LGHT-T300RD-0000 300mm Red LED Bar Light - High Powered, M12, Clear Window

The Zebra LGHT-T300RD-0000 is a 300mm high-powered red LED bar light designed for benchtop inspection, single-camera read stations, and compact machine vision cells. It delivers concentrated 625nm red illumination across a wide field of view, making it the standard external lighting accessory for Zebra Fixed Industrial Scanners (FS series), VS-series machine vision smart cameras, and 4Sight vision controllers.

The clear window configuration delivers maximum light output and contrast - the preferred choice for reading 1D/2D codes on paper labels, printed cartons, and matte surfaces where direct, focused illumination produces the sharpest edge contrast.

Key features

• 300mm high-powered LED bar - sized for benchtop and single-camera applications
• Red wavelength (625nm) - the standard color for barcode reading on paper labels, printed cartons, and most logistics media
• Clear window - optimized for 1D/2D barcode reading on paper labels, printed cartons, and matte non-reflective surfaces where maximum light output is critical.
• 5-pin male M12 connector - industry-standard quick-disconnect for fast install and replacement
• Strobe and continuous operation - higher output in strobed mode for moving products, continuous mode for static inspection
• Native integration with Zebra FS and VS series - direct control from Aurora Design Assistant or the device web interface, no third-party light controller required

Where this light is typically deployed

The 300mm length and red 625nm wavelength make LGHT-T300RD-0000 a fit for the following applications:

• Logistics scan tunnels and conveyor belt reading - illuminating parcels, totes, and cartons as they move past Zebra fixed scanners for 100% code capture.
• Pallet and case-pack verification - lighting full-width shipping units at induction or shipping audit stations.
• Print-and-apply line verification - confirming applied labels are readable immediately downstream of the print head.
• Machine vision inspection cells - providing the consistent, controllable illumination required for reliable Aurora Design Assistant or Aurora Vision Studio inspection projects.
• Returns processing and reverse logistics - reading worn, damaged, or partially obscured labels where additional light output is necessary for first-pass read rates.

Compatible Zebra equipment

LGHT-T300RD-0000 is designed for direct integration with Zebra's Fixed Industrial Scanner and machine vision product lines:

• Zebra FS40, FS42, FS70, and FS80 fixed industrial scanners
• Zebra VS40, VS70, and VS80 machine vision smart cameras
• Zebra Iris GTX and Iris GTR smart cameras
• Zebra 4Sight EV7 and EV6 vision controllers
• Zebra XV7 and XV6 vision controllers

Choosing the right bar light length and window

Zebra's LGHT-T high-powered bar light family is available in multiple lengths and two window configurations. To select the right SKU:

Automation Distribution is an authorized Zebra distributor for the full LGHT family - bar lights, ring lights, dome lights, and the matching control cables. If you need help matching the right light to your scan tunnel layout or inspection cell geometry, call 1-888-600-3080 or use the contact form below.

At-a-glance specifications

Frequently asked questions

What is the difference between Zebra's clear window and diffused window bar lights?

The window in front of the LED array determines how light reaches the target. A clear window passes direct, focused light for maximum output and edge contrast - ideal for paper labels, matte surfaces, and applications where every bit of brightness counts. A diffused window scatters the light to eliminate hot spots and specular glare - ideal for glossy, curved, or reflective surfaces where direct light would create bright spots that make codes unreadable. The two windows produce visibly different images of the same code, so the choice should match the surface being read.

Why red (625nm) instead of white or blue?

Red light at 625nm is the standard wavelength for barcode and 2D code reading on paper labels, printed cartons, and most logistics media. It produces the highest contrast between dark code elements (which absorb red light) and the white substrate (which reflects it). White light is preferred for color part inspection or color-printed codes; blue and IR variants exist for specialty applications on metal or in environments where ambient red would interfere.

Does LGHT-T300RD-0000 come with the cable I need to connect it?

No. LGHT-T300RD-0000 requires a separate external light control cable - the standard part numbers are CBL-LGT00000-M1200 and CBL-LGT00200-M1200. The cable is sold separately because the right choice depends on your scanner or vision controller model and the distance between the light and the host device. Call Automation Distribution at 1-888-600-3080 to confirm the correct cable for your installation.

Can LGHT-T300RD-0000 be controlled directly from a Zebra fixed scanner or vision controller?

Yes. LGHT-T300RD-0000 is designed for native integration with Zebra's FS-series fixed industrial scanners, VS-series machine vision cameras, Iris smart cameras, and 4Sight and XV vision controllers. Strobe timing, continuous output, and on/off control are configured directly from the device's web interface or from within Aurora Design Assistant - no third-party light controller required.

What is the difference between Zebra's LGHT-T and LGHT-B series bar lights?

LGHT-T is Zebra's high-powered logistics bar light series, designed for longer working distances and wider fields of view typical of conveyor and scan tunnel applications. LGHT-B is the standard machine vision bar light series, optimized for shorter working distances and smaller fields of view typical of benchtop and inspection-cell applications. The T-series is built in longer lengths (up to 1200mm) and uses 5-pin M12 connectors; the B-series tops out at shorter lengths and uses 4-pin M12 connectors.

What length should I choose?

Match the bar length to the width of the surface you need to illuminate at your working distance. 300mm suits benchtop inspection and single-camera read stations. 600mm covers most mid-width conveyors and inspection cells. 900mm and 1200mm are sized for wide-belt logistics conveyors, full-pallet scan tunnels, and multi-camera reading stations. If you're unsure, our team can help you size the right light for your conveyor width and camera field of view.

Where can I get help selecting the right light for my application?

Automation Distribution is an authorized Zebra distributor for the full LGHT family and the full Zebra Fixed Industrial Scanner and machine vision product lines. Our team can recommend the right light length, window type, color, and control cable for your scan tunnel, inspection cell, or conveyor read station. Call 1-888-600-3080, use the contact form, or browse the full Zebra catalog.

Zebra is a trademark of Zebra Technologies Corporation. Product specifications shown are based on Zebra's published accessory documentation; consult Zebra documentation for complete electrical and optical specifications.