Zebra FS40-SR20F5-2R00W Fixed Industrial Scanner, 2.3MP Standard Range, Fast 2D Decoder, Dual Ethernet, Red Illumination, Red Bandpass Filter

Zebra FS40-SR20F5-2R00W Fixed Industrial Scanner

The Zebra FS40-SR20F5-2R00W is a standard range FS40 fixed industrial scanner configured with a 2.3 MP global shutter sensor, the Fast 2D decoder package (up to 60 frames per second), dual Ethernet ports, red illumination, and a red bandpass filter. It is built for PLC-controlled track and trace: reading 1D and 2D codes on parts, cartons, and totes as they move through production, storage, and fulfillment, then passing the data straight to your controller over EtherNet/IP, PROFINET, or Modbus TCP.

The dual Ethernet configuration lets you keep the controls network isolated on one port while a second port sends images to a local server or cloud storage. PoE is supported on the primary port, so a single cable can power and connect the scanner.

Configuration at a Glance

Key Capabilities

• ImagePerfect+: captures up to 16 images of a single item, each with its own focus, exposure, gain, and illumination settings, to raise read rates on mixed packaging and varying distances.
• PRZM Intelligent Imaging: Zebra's imaging technology for damaged, poorly printed, or fast-moving 1D and 2D codes.
• ManyCode: reads every barcode in the field of view at once, regardless of quantity or symbology.
• Auto-Tune: one-button setup that sets focus and exposure for the current target.
• Golden Image Compare: compares a live image to a reference image captured at setup to diagnose a dirty lens, lighting change, or camera misalignment.
• Up to nine digital I/O: four opto-isolated and five non-isolated GPIO for triggers, reject gates, stack lights, and external lighting.
• Operator feedback: 360° decode status LEDs, five status LEDs, and an adjustable beeper.
• Aurora software: configure with Zebra Aurora Focus, and give operators a browser-based Aurora HMI dashboard without a PC at every station.

Typical Applications

Conveyor and sortation scanning, work-in-process tracking on assembly lines, carton and tote identification in distribution centers, label verification at pack-out, and any station where a PLC needs a reliable read result to route, reject, or log a part. For direct part marks on metal or molded surfaces, the DPM decoder variant of the FS40 is the better starting point.

Typical Working Ranges (SR, 30° FOV Lens)

Ranges are typical and depend on print resolution, contrast, power source, illumination, and ambient light.

Technical Specifications

Upgrade Path Through Licensing

Capability on the FS40 is added by license rather than by replacing hardware. Available upgrades include the DPM decoder package, deep learning based OCR for human readable text, and the Sensor, Standard, and Advanced machine vision toolsets, which turn the FS40 into a machine vision smart camera for presence checks, measurement, and inspection on the same mounting point.

Completing the Installation

Plan for an M12 X-coded Ethernet cable for each port you use, an M12 12-pin power/I/O cable if you are not powering over PoE, a PoE+ injector or switch if you are, and a mounting bracket. Zebra also offers external lights, replacement internal illumination modules, and alternate internal filters for the FS40 family.