The Baumer VS XC800M12X00IP is a high-performance vision sensor featuring a 1/3? CCD monochrome sensor with a resolution of 1280 × 960 px. It supports external illumination with a direct connection through an integrated VeriFlash® flash controller. The device offers two operational modes: a high-resolution mode with up to 32 inspections per second and a high-speed mode with a limited resolution of up to 54 inspections per second. It can handle up to 255 different jobs with 32 features per job. The sensor utilizes Baumer FEX® 4.0 for advanced signal processing and has a defect image memory of 8. It is equipped with a C-mount lens and requires a 24 V ±25% nominal voltage power supply. The power consumption peaks at 42 W with I/O and lighting. It features multiple digital inputs and outputs for various functions including trigger, job selection, and synchronization. Setup is facilitated through an Ethernet connection, and it supports PROFINET, EtherNet/IP, and TCP/UDP protocols. The device's visualization capabilities are enhanced by a configurable web interface with a MultiViewer function. The sensor's compact design measures 53 mm in width, 99.5 mm in height, and 49.8 mm in depth, weighing less than 300 g. The housing is made of aluminum with a PMMA cover glass.
- Resolution:
- 1280 × 960 px
- Sensor type:
- 1/3? CCD, monochrome
- Illumination:
- external, available as accessory
- Illumination connection:
- direct (integrated VeriFlash® flash controller)
- High-resolution mode:
- max. 32 inspections per second
- High-speed mode (limited resolution):
- max. 54 inspections per second
- Number of jobs (products):
- ? 255
- Features per job:
- 32
- Signal processing:
- Baumer FEX® 4.0
- Defect image memory:
- 8
- Lens:
- C-mount
- Nominal voltage power supply:
- 24 V ±25 %
- Nominal voltage power supply (add-on):
- Class 2 according to NEC / protection class III
- Nominal voltage power supply (info):
- The device is intended for supply from an isolated limited power source according to UL61010-1, 3rd ed cl. 9.4 or a limited energy source according to UL60950-1 or Class 2 according to NEC.
- Power consumption:
- Max. 42 W (with I/O and lighting)
- Inputs:
- 8 30 V (polarity protected)
- Digital inputs:
- 5 inputs trigger job selection external teach-in encoders (CH-A, CH-B) 500 kHz
- Outputs:
- PNP Ipeak = 100 mA and Ieff = 50 mA (short-circuit proof)
- Digital outputs:
- 5 outputs Pass / Fail Flash Sync Alarm Camera Ready Output Enable
- Initial setup:
- Ethernet (10BASE-T / 100BASE-TX)
- Process interface:
- PROFINET (CC-A) EtherNet/IP TCP/UDP (Ethernet)
- Visualization:
- configurable web interface with MultiViewer function
- Width:
- 53 mm (without lens/tube)
- Height:
- 99.5 mm (without lens/tube)
- Depth:
- 49.8 mm (without lens/tube)
- Weight:
- ? 300 g (without lens/tube)
- Material:
- housing: aluminum cover glass XC tube: PMMA
- Datasheet:
- View
- Operating Manual:
- View
