Contactors and Protection Relays

TeSys GV lug connector with screws, for motor circuit breakers GV4. Tu put in place of an EverLink connector, it is used to allow connection of cables with lugs. A terminal shield LAD96590 can complete the lug connections for protection agianst direct...

TeSys U additional function module to be inserted in advanced power bases LUB120, LUB320, LUB380 for thermal overload alarm. It provides 1NO instantaneous contact rated 2A 230V AC / 24V DC, a LED status on front panel. The alarm is activated when the...

TeSys U control terminal block to be inserted in power bases LUB120, LUB320, LUB380 for the centralized control of a starter controller. To be used for ON/OFF control of one direction motor applications with Profibus DP, CANopen, DeviceNet, Advantys STB...

Shaft support bracket for deep enclosure,TeSys Deca Frame 3,TeSys Ulta,for depth exceeding 300 mm

TeSys U control terminal block to be inserted in a reversing power base LU2B12*, LU2B32*, LU2B38* for the centralized control of a starter controller. To be used for ON/OFF control of reversing motor applications with Profibus DP, CANopen, DeviceNet,...

TeSys GS fusible disconnect switches with the use of Class CC or J fuses provide exceptional high short circuit protection. Switches are available from 30A to 800A sizes. SCCR of up to 200 kA are possible with these fusible disconnect switches. This...

TeSys U phase barrier for use with power bases LUB12, LUB32, LUB38, LUB120, LUB320, LUB380 or a limiter block LUALB1. It ensures a complementary electrical insulation between phases. Compulsory for use with a 690V AC network and with a 440 V AC network...

TeSys U assembling connector between a reverser block LU6M* and power bases LUB120, LUB320, LUB380 in side mounting. It provides screw clamp terminals for the wiring of the FW/RV/OFF control circuit (2 directions of rotation). Requires the use of the...

TeSys U control terminal block to be inserted in a reverser block LU2M* or LU6M* for the local wired control of a reversing starter controller. To be used for FW/RV/OFF control of reversing motor applications with wired control. It provides screw clamp...

blanking cover, Tesys Ultra for add-on contact block location LU9

Shaft extension, TeSys GS, front, 30A, 320mm

TeSys GV cable connector, for motor circuit breakers GV5, GV7. To be clipped on a circuit breaker terminal, it allows connection of cables without lugs. Up to 220A, for cables cross-section 1.5-185mm², cable connection by screw terminals. set of 3 units...

TeSys GS - disconnect switch shaft - 320mm - 30…100 A

TeSys GS direct operating handle for 3-pole and 4-pole 50A-63A IEC fuse switch-disconnectors GS1FD, GS1GD. Black handle, padlockable, for a direct mounting on the right-hand side of the switch disconnector. Green Premium compliant (RoHS/REACh).

Communication cable, TeSys T, 2xRJ45, 1m

Profibus DP connector, TeSys Ultra, LU9 A for TeSysUltra starter-controllers

TeSys U blanking cover to be inserted in the cavity of the auxiliary modules when unused, for all power bases LUB12, LUB32, LUB38, LUB120, LUB320, LUB380, LU2B12*, LU2B32*, LU2B38*. Replacement part, this cover is included with all power bases. Green...

TeSys GS accessory, shaft extension for external operating handle, to be used with 3-pole and 4-pole 30A-400A IEC/UL fuse switch-disconnectors GS2E, GS2F, GS2G, GS2J, GS2K, GS2L, GS2M, GS2N, GS2Q. Shaft length 400mm, cross section 10x10mm. Green Premium...

TeSys GS accessory, shaft extension for external operating handle, to be used with 3-pole and 4-pole 30A/32A IEC/UL fuse switch-disconnectors GS1D. Shaft length 400mm, cross section 5x5mm. Green Premium compliant (RoHS/REACh).

Connection cable, motor starter, TeSys Ultra to splitter box, 2 RJ45, 3m