Description
Technical Data
Input
Input protection
- Surge protection according to VDE 0160, over/undervoltage (auto restart)
- Phase monitoring (reduced output power): PFC error
Number of phases
3
Rated voltage UN
3 ?? AC 400???500 V
Operation voltage range
AC 340???550 V / DC 520???750 V
Line frequency
47???63 Hz
Rated current IN
4.5 A @ AC 400 V / 3.5 A @ AC 500 V
Inrush current
< 10 A (active inrush current limitation)
External fuse
Mini-circuit breaker: 3 ?? C 10 A (required)
Power Factor Correction P.F.C.
>0.92
Output
Rated voltage UN
DC24V
Rated current IN
100 A
Max. output current
>150 A, 5 s @ Uout > 90 %
Short-circuit current
150 A, 5 s
Heat dissipation
<200 W
Setting range Uout min./Uout max.
DC 11.5???29 V
Load regulation
<1 %
Rise time
< 4.5 S
Ripple and Noise
<200 mV pp
Hold up time
>10 ms @ AC 400 V / >10 ms @ AC 500 V
Status indication DC ON LED green
alphanumeric display
Status indication DC LOW LED red
alphanumeric display
Parallel / redundant mode
max. 4 devices
Efficiency
>92 %
Over voltage protection
>DC 33 V (UA=24 V)
Short circuit
Hiccup Mode / current limit / constant current
Monitoring
DC ON Control (Rdy)
- Relay, N/O contact active, adjustable, DCok: 90???110 % Uset, ACok: acc. input voltage range, overload
- Overtemperature range, charging complete
Switching capacity
AC/DC 30 V, 1 A, 30 W
Isolation voltage
AC 500 V
Output current
galvanically isolated: 0???10 V and 4???20 mA
General
Insulation voltage input / output
DC 4.2 kV
Insulation voltage input / ground
DC 2.2 kV
Insulation voltage output / ground
DC 750 V
Derating
>45 ???C: -40 W/???C
Operation temperature range
-20 ???C ??? +60 ???C (Derating)
Storage temperature range
-25???C???85???C
MTBF
>500000 h: SN29500 / >150000 h: MIL HDBK 217F
Cooling
Air convection, forced cooling >45???C, 80 mm distance top/bottom, 10 mm side
Housing material
Aluminum
Mounting
- DIN rail mountable TS35
- (EN 60715)
Installation position
vertical
Shock resistance
30g
Vibration resistance
5 ??? 17.8 Hz: ??ñ1.6 mm, 17.8 ??? 500 Hz: 2 g 2 hours/axes X,Y,Z, IEC 60068-2-6: 2007
Protection class
IP20 (IEC 529, EN 60529)
Protection class
I
Over voltage category
III
Degree of polution
2
Weight
2,8 kg/piece
Connection type
- Screw terminal
- Input
- 0.20 mm2 ??? 4.0 mm2
- Output
- 0.20 mm2 ??? 35.0 mm2
- Auxiliary
- 0.20 mm2 ??? 1.5 mm2
Dimensions (w ?? h ?? d)
233??158??102 mm
Approvals
cULus (E249179)
Standards
- UL 508
- IEC 950
- EN 60950
- EN 55011
- EN 61000-4-5
- Surge immunity level IV
- VDE 0160
- EN 61000-4-2/3/4/5/6/11
PU
1 piece
Interface
User Interface
LCD display 16 ?? 2 character, multi language, 4 keys (command and navigation)
Auxiliary voltage output
galvanically isolated DC 12 V, 100 mA
NTC
Temperature-controlled battery charging (mandatory)
Range of functions
The new power compact series provides a number of additional adjustment options via function keys. The selected functions are shown on a display. In addition, the current output voltage and current are displayed for normal operation.
Input protection
??? Active Surge suppressor and inrush limiter (ASSIL) as protection against overvoltages according to VDE 0160
??? PFC error monitoring
??? Phase monitoring with automatic reduction of the output power
??? Automatic start/restart system for over- and undervoltages
Output protection
??? Adjustable current limiting between 0.1 IN and IN
??? Hiccup autoreset based on current limiting or maximum output voltage (150%)
??? Status display and signal
??? In addition to an LED for ???DC OK??? and error displays, the devices have the following analog outputs 0???10 V and 4???20 mA as direct function of the load current
??? Programmable relay contact with the functions
Output voltage/current,
Overload,
Overtemperature
Additional functions
??? Temperature-compensated battery charging function
???Display and compensation of the voltage drop for long cables
???Remote On/Off of the output voltage
???DC 12 V auxiliary voltage
???Monitoring and control interface based on RS232 (optional)
???Integrierte O-Ring-Diode
??? Load sharing in parallel operation
???Load current sharing
Input protection
??? Active Surge suppressor and inrush limiter (ASSIL) as protection against overvoltages according to VDE 0160
??? PFC error monitoring
??? Phase monitoring with automatic reduction of the output power
??? Automatic start/restart system for over- and undervoltages
Output protection
??? Adjustable current limiting between 0.1 IN and IN
??? Hiccup autoreset based on current limiting or maximum output voltage (150%)
??? Status display and signal
??? In addition to an LED for ???DC OK??? and error displays, the devices have the following analog outputs 0???10 V and 4???20 mA as direct function of the load current
??? Programmable relay contact with the functions
Output voltage/current,
Overload,
Overtemperature
Additional functions
??? Temperature-compensated battery charging function
???Display and compensation of the voltage drop for long cables
???Remote On/Off of the output voltage
???DC 12 V auxiliary voltage
???Monitoring and control interface based on RS232 (optional)
???Integrierte O-Ring-Diode
??? Load sharing in parallel operation
???Load current sharing
Dimensions
PIN assignment
Serial operation
Parallel/redundant mode
Charging operation
Output voltage in 0???10 V
Output voltage in 4???20 mA
