Power Supplies

Width only 96mm Efficiency up to 95,5% Good output regulation of a wide input voltage range 25% Power reserves available up to 15s Full output power between -25 and +60°C Excellent power factor, negligibly low inrush current   Output 72Vdc ...

Redundancy module for building redundant systems Two 10A inputs, one 20A output Only 0.85V voltage drop between input and output under full load Full output current between -40 and +60°C Quick-connect spring-clamp terminals Reverse polarity...

Redundancy Module, 12-28VDC, 20A, Dual Input MOSFET redundancy module24V, 20A  For N+1 and 1+1 Redundant Systems Dual Input with Single Output Only 60mV Voltage Drop at 10A Output Current Only 0.6W Loss at 10A 160% (32.5A) Peak Load Capability...

Redundancy Module, 24-28VDC, 20A, Dual Input with Load Sharing MOSFET redundancy module24V, 20A  1+1 Redundancy with Automated Load Sharing Dual Input with Single Output Redundancy OK Signal Included which Reports the Loss of Redundancy 160% (32...

Mosfet redundancy module Two 20A inputs, one 40A output Suitable for all power supplies Minimal power losses and low voltage drop thanks to MOSFET technology Full output current between -40 and +70°C   Output 12-28Vdc   40A  ...

Mosfet redundancy module Two 20A inputs, one 40A output Not suitable for QT20, QTD20, SilverLine Output short-circuit current max. 26A allowed Minimal power losses and low voltage drop thanks to MOSFET technology Full output current between -40 and...

Mosfet Redundancy module, output with plug-connector to allow hot swapping One 40A input, one 40A output Not suitable for QT40, SilverLine Output short-circuit current max. 22A allowed Minimal power losses and low voltage drop thanks to MOSFET...

Mosfet redundancy module Two 20A inputs, one 40A output Suitable for all power supplies Minimal power losses and low voltage drop thanks to MOSFET technology Full output current between -40 and +60°C   Output 24-56Vdc   40A  ...

Mosfet redundancy module Two 40A inputs, one 80A output Suitable for all power supplies Minimal power losses and low voltage drop thanks to MOSFET technology Full output current between -40 and +70°C   Output 24-28Vdc   80A  ...

Mosfet redundancy module Two 40A inputs, one 80A output Not suitable for QT40, SilverLine Output short-circuit current max. 44A allowed Minimal power losses and low voltage drop thanks to MOSFET technology Full output current between -40 and +60°C ...

Redundancy module for building redundant systems Two 10A inputs, one 20A output Two alarm relay-contacts for -h input voltage Only 0.85V voltage drop between input and output under full load Full output current between -40 and +60°C Reverse polarity...

Mounting Bracket, For DIN Rail Mounting FIEPOS

Mounting Bracket, For Wall Mounting FIEPOS

Wall / Panel mout bracket for UBC10 This accessory is used to mount the DC-UPS UBC10 units on a wall or on a panel without using a DIN-rail. The bracket can be directly mounted without removing the aluminium brackets and the black plastic slide of...

This bracket is used to mount the unit onto a flat surface without utilizing a DIN-rail. The bracket is suitable for all DIMENSION units, which have the bracket listed as an accessory in the device datasheets. 

Mounting Bracket, For Panel Mounting Dimension CP5 & UC10

This accessory is used to mount DIMENSION power supplies and other DIMENSION units sideways to reduce the installation depth. The two aluminium brackets and the black plastic slide must be removed from the units, to allow mounting of the zinc-plated...

This accessory is used to mount DIMENSION power supplies and other DIMENSION units sideways to reduce the installation depth. The two aluminium brackets and the black plastic slide must be removed from the units, to allow mounting of the zinc-plated...

This accessory is used to mount DIMENSION power supplies and other DIMENSION units sideways to reduce the installation depth. The two aluminium brackets and the black plastic slide must be removed from the units, to allow mounting of the zinc-plated...

This accessory is used to mount DIMENSION power supplies and other DIMENSION units sideways to reduce the installation depth. The two aluminium brackets and the black plastic slide must be removed from the units, to allow mounting of the zinc-plated...