Rail / Chassis Mount Terminal Blocks
Master every challenge with WAGO's rail-mount terminal block systems. The right actuation variants for any application: lever, push-button or operating slot.
-
WAGO 281-653
$4.154-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm²; orange281-653$4.15 -
WAGO 281-652
$3.884-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm²; gray281-652$3.88 -
WAGO 281-651
$3.283-conductor through terminal block; 4 mm²; suitable for Ex i applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm²; blue281-651$3.28 -
WAGO 281-637
$8.903-conductor ground terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm²; green-yellow281-637$8.90 -
WAGO 281-637/999-950
$8.973-conductor ground terminal block; 4 mm®; suitable for Ex e II applications; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP281-637/999-950$8.97 -
$17.66
-
WAGO 281-636/281-487
$17.66Component terminal block; double-deck; with 2 diodes 1N4007; Bottom anode; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-636/281-487$17.66 -
WAGO 281-635/281-492
$20.92Component terminal block; double-deck; with 2 diodes 1N4007; Top anode, left-side anode; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-635/281-492$20.92 -
WAGO 281-635/281-491
$21.32Component terminal block; double-deck; with 2 diodes 1N4007; Top anode, right-side anode; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-635/281-491$21.32 -
WAGO 281-635/281-490
$20.92Component terminal block; double-deck; with 2 diodes 1N4007; Top anode; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-635/281-490$20.92 -
$20.92
-
WAGO 281-634/281-434
$15.09Double-deck LED terminal block; with red LED (PN); 24 VDC; rail-mount; 4-conductor; 6 mm wide; gray281-634/281-434$15.09 -
$15.09
-
WAGO 281-633/281-411
$17.51Component terminal block; double-deck; with diode 1N4007; Anode, top; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-633/281-411$17.51 -
WAGO 281-633/281-410
$17.85Component terminal block; double-deck; with diode 1N4007; Anode, bottom; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-633/281-410$17.85 -
WAGO 281-631
$3.103-conductor through terminal block; 4 mm²; center marking; for DIN-rail 35 x 15 and 35 x 7.5; CAGE CLAMP; 4,00 mm²; gray281-631$3.10 -
WAGO 281-630
$6.40Double-deck terminal block; Through/through terminal block; with additional jumper position on lower level; suitable for Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; 4,00 mm²; blue281-630$6.40 -
WAGO 281-629
$5.96Double-deck terminal block; Through/through terminal block; suitable for Ex i applications; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; 4,00 mm²; blue281-629$5.96 -
WAGO 281-624
$12.742-conductor disconnect terminal block; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm®; CAGE CLAMPp> Automatically destroys the oxide film during clamping. Prevents fresh oxidation at the...281-624$12.74 -
WAGO 281-623
$12.552-conductor fuse terminal block; with pivoting fuse holder; for glass cartridge fuse 1/4" x 1 1/4"; without blown fuse indication; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray281-623$12.55