Schneider Electric

Schneider Electric 2510FS2 Manual Starter, fractional horsepower, 16A, 2 poles, 1 HP at 277 VAC, toggle operated, no indicator, stainless flush

(No reviews yet) Write a Review
SKU:
2510FS2
MPN:
2510FS2
Condition:
New
Line Rated Current:
16 A
Local Signaling:
no indicator
Thermal Overload Type:
melting alloy
[Ue] Rated Operational Voltage:
277 V AC || 230 V DC
Motor Starter Type:
non reversing
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Phase:
1 phase
Electrical Connection:
screw clamp terminals
Cable Entry:
without
Awg Gauge:
AWG 14...AWG 12 copper
Product Or Component Type:
Single Unit Manual Starter
Control Type:
toggle switch
Range Of Product:
F
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Pvc Free:
Yes
Reset:
manual
Maximum Horse Power Rating:
1 hp 115 V AC || 1 hp 277 V AC || 0.75 hp 115 V DC || 0.75 hp 230 V DC || 2 hp 230 V AC
Country of Origin:
United States
Warranty:
18 months
Eu Rohs Directive:
Not compliant
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Nema Degree Of Protection:
not rated (flush plate) Stainless Steel standard size
Poles Description:
2P
Depth:
2.19 in
$104.04

Description

2510F fractional horsepower non-reversing manual starters provides manual On-Off control with overload protection for small motors. Designed for fractional single phase motors up to 1 HP. The toggle operator provides an easy manual On-Off control of small motors. These manual starters are used in a variety of industrial and commercial installations. Typical applications include fans, conveyors, pumps, and small machine tools. Melting alloy thermal units are used with this manual starter to sense over current conditions. Overload thermal unit is ordered separately to match motor data. This 2 pole nonreversing manual starter has a 16A current rating. Starter has a 1 HP at 115 VAC, 2 HP at 230 VAC, 1 HP at 277 VAC and 0.75 HP at 115 and 230 VDC ratings. This NEMA 1 flush mounted unit with a stainless steel flush plate can be mounted in a standard switch box or in a machine cavity without a box. This manual starter is 4.50 inches tall, 2.75 inches wide and 2.19 inches deep. This device is without a pilot light indicator. Manual starter is UL listed and CSA certified. NEMA 4 enclosure.
View AllClose

Related Products

Related Products