Universal Enclosures

Linergy 3P+N plug outlet. It provides 3P+N, 2 points and 4 cables with 4 mm², 0.25 m. The conventional free air thermal current is 32A. Sold in lots of 6 units. It conforms to IEC 60439 standard. Multi standards certified (CSA, DNV, UL, LROS (Lloyds...

Linergy 3P plug outlet. It provides 3P, 2 points and 3 cables with 4 mm², 0.25 m. The conventional free air thermal current is 32A. Sold in lots of 6 units. It conforms to IEC 60439 standard. Multi standards certified (CSA, DNV, UL, LROS (Lloyds register...

PLUG TRI C 32A FIL LG250

Simple and quick products to mount and wire up automated control and distribution panels. It is made of 4 conductors with 24 tap-off units at 18 mm intervals. It is suitable for mounting in 800 mm enclosure width.

Linergy busbar for AC network. It applies to distribution, 12 Tap-offs and 4 conductors. The rated operational current is 160 A at 35 °C. Mounting by horizontal and vertical which using side stop AK5BT01 on mounting plates AK5PA. It provides protection...

Linergy busbar for AC network. It applies to distribution, 18 Tap-offs and 4 conductors. The rated operational current is 160 A at 35 °C. Mounting by horizontal and vertical which using side stop AK5BT01 on mounting plates AK5PA. It provides protection...

Simple and quick products to mount and wire up automated control and distribution panels. It is made of 4 conductors with 48 tap-off units at 18 mm intervals. It is suitable for mounting in 1200 mm enclosure width.

BUS BAR TRI 160A LG1096MM

Busbars can be screw-mounted onto any type of support. If the busbar is to be used with component mounting plates with a tap-off, it is essential that the bus bar is mounted on the AM1DL201 DIN mounting rail. This 4 conducor bus bar system has 30 tap...

PLATE 50A TRI L108 DH190

Linergy 1P + N plug outlet. It provides 1P+N, 1 point and 2 cables with 4 mm². The conventional free air thermal current is 32A. Sold in lots of 6 units. It conforms to IEC 60439 standard. Multi standards certified (CSA, DNV, UL, LROS (Lloyds register of...

Linergy 3P plug outlet. It provides 3P, 2 points and 3 cables with 4 mm², 1 m. The conventional free air thermal current is 32A. Sold in lots of 6 units. It conforms to IEC 60439 standard. Multi standards certified (CSA, DNV, UL, LROS (Lloyds register of...

PLUG BIP 32A PH PH L1000

PLATE 25A TRI C L108H190

Part hot plug pre-assembled busbar system for Linergy HK. It is a 105 mm height single plate component mounting plate incorporating tap-off with 3 phases. It uses 3 18 mm points on the busbar system and it is composed of 1 W rail for component support.

PLATE BIP PH2 PH3 H105MM

PLATE BIP PH1 PH3 H105MM

PLATE BIP PH1 PH2 H105MM

PLATE BIP PH2 N H105MM

PLATE BIP PH1 N H105MM