
Schneider Electric 2510FW2 Manual Starter, fractional horsepower, 16A, 2 poles, 1 HP at 277 VAC, no indicator, NEMA 4 enclosure, 1 conduit opening
Schneider Electric
$353.12
2510F fractional horsepower non-reversing manual starters provides manual On-Off control with overload protection for small motors. Designed for fractional single phase motors up to 1 HP. The toggle operator provides an easy manual On-Off control of small motors. These manual starters are used in a variety of industrial and commercial installations. Typical applications include fans, conveyors, pumps, and small machine tools. Melting alloy thermal units are used with this manual starter to sense over current conditions. Overload thermal unit is ordered separately to match motor data. This 2 pole nonreversing manual starter has a 16A current rating. Starter has a 1 HP at 115 VAC, 2 HP at 230 VAC, 1 HP at 277 VAC and 0.75 HP at 115 and 230 VDC ratings. A NEMA 4 watertight and dusttight die cast zinc alloy enclosure is used to protect this starter. This enclosure has one conduit entry on the bottom. The 0.75 inch conduit entry is tapped with number 14 pipe threads. This manual starter is 4.38 inches tall, 3.00 inches wide and 4.25 inches deep. A toggle handle is used to turn the manual starter on and off. The toggle handle can be padlocked in the off position. This device is without a pilot light indicator. Manual starter is UL listed and CSA certified. Enclosure is sheet steel with wrap around thermoplastic cover for convenience of wiring.
- Electrical Connection:
- screw clamp terminals
- Cable Entry:
- 0.75 NPT (bottom)
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Motor Starter Type:
- non reversing
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Poles Description:
- 2P
- Awg Gauge:
- AWG 14...AWG 12 copper
- Thermal Overload Type:
- melting alloy
- Country of Origin:
- United States
- Warranty:
- 18 months
- Product Certifications:
- UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
- Reset:
- manual
- Nema Degree Of Protection:
- NEMA 4 die cast zinc alloy standard size
- Maximum Horse Power Rating:
- 1 hp 115 V AC || 1 hp 277 V AC || 0.75 hp 115 V DC || 0.75 hp 230 V DC || 2 hp 230 V AC
- Eu Rohs Directive:
- Not compliant
- Phase:
- 1 phase
- Depth:
- 4.25 in
- Pvc Free:
- Yes
- Local Signaling:
- no indicator
- [Ue] Rated Operational Voltage:
- 277 V AC || 230 V DC
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Control Type:
- toggle switch (with lock-off)
- Line Rated Current:
- 16 A
- Range Of Product:
- F
- Product Or Component Type:
- Single Unit Manual Starter