Schneider Electric

Schneider Electric 2510KG2B Switch, manual, 30A, 3 pole, 10 HP at 575 VAC, three phase, toggle operated, red 208/277 VAC indicator, NEMA 1 enclosure

(No reviews yet) Write a Review
SKU:
2510KG2B
MPN:
2510KG2B
Condition:
New
Warranty:
18 months
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Range Of Product:
K
Electrical Connection:
screw clamp terminals
Line Rated Current:
30 A
Poles Description:
3P
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Eu Rohs Directive:
Not compliant
Depth:
2.75 in
Control Type:
toggle
Maximum Horse Power Rating:
2 hp 115 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC || 7.5 hp 230 V AC || 10 hp 460 V AC || 10 hp 575 V AC
Product Certifications:
UL listed file E42243 CCN NLRV || CSA LR25490 class 3211 05
Pvc Free:
Yes
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Cable Entry:
0.5" and 0.75" knock-outs (top and bottom)
Product Or Component Type:
Single Unit Manual Switch
Awg Gauge:
AWG 14...AWG 10 copper
Phase:
3 phase
Local Signaling:
red indicator, 208...277 V
Motor Starter Type:
non reversing
Country of Origin:
Mexico
Nema Degree Of Protection:
NEMA 1 Plastic standard size
$232.25

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Manual Switches. This nonreversing manual switches is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 10 HP at 460VAC, 10 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has a 208 to 277 Vac red pilot light indicator. This NEMA 1 general purpose enclosure is a surface mounting enclosure. The enclosure has has a 0.5 and 0.75 knockout on the top and bottom. The enclosure is 4.25 inches tall, 2.44 inches wide and 2.75 inches deep. This device is UL Listed and CSA certified.
View AllClose