Schneider Electric

Schneider Electric 2510KO6 Switch, manual, 30A, 3 pole, 20 HP at 575 VAC, three phase, toggle operated, no indicator, open style

(No reviews yet) Write a Review
SKU:
2510KO6
MPN:
2510KO6
Condition:
New
Warranty:
18 months
Control Type:
toggle
Range Of Product:
K
Awg Gauge:
AWG 14...AWG 10 copper
Product Or Component Type:
Single Unit Manual Switch
Electrical Connection:
screw clamp terminals
Local Signaling:
no indicator
Maximum Horse Power Rating:
2 hp 115 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC || 7.5 hp 230 V AC || 15 hp 460 V AC || 20 hp 575 V AC
Country of Origin:
Mexico
Motor Starter Type:
non reversing
Poles Description:
3P
Product Certifications:
UL recognized E42243 CCN NLRV2 || CSA LR25490 class 3211 05
Depth:
2.34 in
Nema Degree Of Protection:
not rated (open device)
Pvc Free:
Yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Line Rated Current:
30 A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Eu Rohs Directive:
Not compliant
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Phase:
3 phase
$154.53

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Manual Switches. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This three pole switch is rated for 2 HP at 115VAC, 7.5 HP at 230VAC, 15 HP at 460VAC, 20 HP at 600VAC three phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 30A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. This manual motor switch is not supplied with an enclosure. This switch is 4.13 inches tall, 1.69 inches wide and 2.34 inches deep. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products