
Schneider Electric 2510KR1 Switch, manual, 20A, 2 pole, 3 HP at 575 VAC, single phase, toggle operated, no indicator, NEMA 7&9, one conduit opening
Schneider Electric
$359.35
2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. They are designed for single or three phase AC motors. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 20A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. A cast aluminum NEMA 7 and 9 hazardous location, Class 1, Groups B, C & D and Class II, Groups E, F, & G enclosure is used to protect this starter. This enclosure has one conduit entry on the bottom. The 0.75 inch conduit entry is tapped with number 14 pipe threads. Enclosure is 6.36 inches tall, 3.95 inches wide and 4.35 inches deep. This device is UL Listed and CSA certified.
- Control Type:
- toggle
- Poles Description:
- 2P
- Local Signaling:
- no indicator
- Pvc Free:
- Yes
- Phase:
- 1 phase
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Electrical Connection:
- screw clamp terminals
- Cable Entry:
- 0.75 NPT (bottom)
- Country of Origin:
- Mexico
- Line Rated Current:
- 30 A
- [Ue] Rated Operational Voltage:
- 600 V AC || 230 V DC
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Motor Starter Type:
- non reversing
- Warranty:
- 18 months
- Eu Rohs Directive:
- Not compliant
- Maximum Horse Power Rating:
- 2 hp 115 V AC || 2 hp 230 V AC || 3 hp 460 V AC || 3 hp 575 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Product Or Component Type:
- Single Unit Manual Switch
- Product Certifications:
- UL listed file E58760 CCN NPXZ || CSA LR26817 class 3218 04
- Nema Degree Of Protection:
- NEMA 3R/7/9 Cast Aluminium standard size
- Depth:
- 4.35 in
- Range Of Product:
- K
- Awg Gauge:
- AWG 14...AWG 10 copper