Schneider Electric

Schneider Electric 2510KR1H Switch, manual, 20A, 2 pole, 3 HP at 575 VAC, single phase, toggle operated, no indicator, NEMA 7&9, two conduit opening

(No reviews yet) Write a Review
SKU:
2510KR1H
MPN:
2510KR1H
Condition:
New
Local Signaling:
no indicator
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Electrical Connection:
screw clamp terminals
Maximum Horse Power Rating:
2 hp 115 V AC || 2 hp 230 V AC || 3 hp 460 V AC || 3 hp 575 V AC || 1 hp 90 V DC || 2 hp 115 V DC || 1.5 hp 230 V DC
Nema Degree Of Protection:
NEMA 3R/7/9 Cast Aluminium standard size
[Ue] Rated Operational Voltage:
600 V AC || 230 V DC
Cable Entry:
0.75 NPT (top and bottom)
Product Certifications:
UL listed file E58760 CCN NPXZ || CSA LR26817 class 3218 04
Control Type:
toggle
Country of Origin:
Mexico
Warranty:
18 months
Line Rated Current:
30 A
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Phase:
1 phase
Pvc Free:
Yes
Depth:
4.35 in
Product Or Component Type:
Single Unit Manual Switch
Range Of Product:
K
Awg Gauge:
AWG 14...AWG 10 copper
Poles Description:
2P
Motor Starter Type:
non reversing
Eu Rohs Directive:
Not compliant
$390.86

Description

2510K manual motor switches are Intended for industrial, commercial and residential applications. These switches are for applications where overload protection is not required or is provided separately. Manual motor switches provide manual On Off control of small motors. Overload protection for the motor must be supplied separately. This nonreversing manual switch is toggle operated. The maximum operational voltage is 600 VAC and 250 VDC. This two pole switch is rated for 2 HP at 115VAC, 2 HP at 230VAC, 3 HP at 460VAC, 3 HP at 600VAC single phase, 1 HP at 90 VDC, 2 HP at 115 VDC and 1.5 HP at 230 VDC and 20A continuous. The screw clamp terminals will accept 14 to 10 AWG copper wire. This switch has no pilot light indicator. A cast aluminum NEMA 7 and 9 hazardous location, Class 1, Groups B, C & D and Class II, Groups E, F, & G enclosure is used to protect this starter. This enclosure has one conduit entry on the bottom and one on the top. The 0.75 inch conduit entries are tapped with number 14 pipe threads. Enclosure is 6.36 inches tall, 3.95 inches wide and 4.35 inches deep. This device is UL Listed and CSA certified.
View AllClose

Related Products

Related Products