Schneider Electric

Schneider Electric 831VS-240A Voltage sensor relay, Legacy, SPDT, 15A, 240 VAC, 0 to 10s, 1 time scale, 48-276 VAC, DIN mounting

(No reviews yet) Write a Review
SKU:
831VS-240A
MPN:
831VS-240A
Condition:
New
Reach Free Of Svhc:
Yes
Mounting Support:
35 mm DIN rail conforming to IEC 60715
Breaking Capacity:
4000 VA AC-1
[Us] Rated Supply Voltage:
160...276 V AC 50...60 Hz
Toxic Heavy Metal Free:
Yes
Weight:
73 g
Maximum Switching Voltage:
250 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Tightening Torque:
0.8-0.8 N.m
Contacts Material:
AgNi
Mechanical Durability:
15000000 cycles
Time Delay Range:
0...10 s
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Electrical Durability:
30000 cycles
Country of Origin:
United States
Depth:
64 mm
Reach Regulation:
Free of Substances of Very High Concern above the threshold
[Ie] Rated Operational Current:
15 A at 240 V AC-1
Power Consumption In Va:
1.2 VA 240 V
Local Signaling:
1 LED red || 1 LED green
Mercury Free:
Yes
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Time Delay Type:
adjustable
Ambient Air Temperature For Operation:
-20-55°C
Tripping Threshold:
160...276 V || 30...99 % of Us
Net Weight:
73 g
Standards:
IEC 61010-1 || EN 60255-26 || EN 60255-27
Ip Degree Of Protection:
IP20 IEC 60529 terminals) || IP40 IEC 60529 front panel)
Minimum Switching Current:
100 mA 5 V
Product Certifications:
CE || UL || WEEE || RoHS
China Rohs Regulation:
X
Hysteresis:
2-6 % adjustable from fault to OK state overvoltage or undervoltage detection
Ambient Air Temperature For Storage:
-30-70°C
Control Type:
with adjustment knob front
Temperature Drift:
< 0.1 %/°C
Sensor Type:
voltage sensor
Dielectric Strength:
4000 V between input and output
Awg Gauge:
AWG 14
Product Or Component Type:
relay
Repeat Accuracy:
+/- 1 %
Voltage Range:
48...276 V
Switch Function:
SPDT
Overvoltage Category:
III IEC 60664-1
Range Of Product:
Legacy
Rohs Exemption Information:
Yes
Nominal Output Current:
15 A
$153.73

Description

The SE Relays 831 series voltage sensor, single-phase AC voltage sensing device is designed to be wired across terminals A1 and A2 with the voltage being monitored. Voltage sencor is capable of monitoring and reacting to overvoltage and undervoltage conditions. The Umax dial is used to set the upper trip-point of 85VAC to 150VAC for the voltage sensor. The Umin dial is a 30–99% of upper preset of the Umax dial and is used to set the lower trip-point for the voltage sensor. Relay has SPDT silver alloy contacts, rated 15A at 12VAC. The timing dial is used to delay the transfer of the contacts, from 0s to 10s, when a set point has been violated. Three-state indication LEDs indicates normal state by green LED and two types of faulted states by blinking red LED as timing state and steady on red LED as energized relay. Direct mount on a 35mm DIN rail, narrow width 17.5mm makes this relay ideal for tight spaces.
View AllClose

Related Products

Related Products