Schneider Electric 8536SDO1V02H633S NEMA Motor Starter, Type S, nonreversing, Size 2, 45A, 25 HP at 460 VAC, up to 100 kA SCCR, 3 phase, 3 pole, TeSys T, 120 VAC coil, open
Schneider Electric
$2,361.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric 8536SDO1V02H633S NEMA Motor Starter, Type S, nonreversing, Size 2, 45A, 25 HP at 460 VAC, up to 100 kA SCCR, 3 phase, 3 pole, TeSys T, 120 VAC coil, open
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 2 non-reversing starter has a 45 ampere rating. This NEMA Size 2 motor starter has 3 phase ratings of 10 HP at 200 VAC, 15 HP at 230 VAC and 25 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a TeSys T overload relay with ProfiBus communication and a 5.0A to 100A range to sense over current conditions. This NEMA starter has a 100 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 110/120 VAC 50/60 Hz operating coil wired for separate control. This NEMA starter is an open device without an enclosure. This starter is 7.81 inches tall, 4.31 inches wide and 4.94 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
- Local Signaling:
- without pilot light
- Motor Starter Type:
- non reversing
- Thermal Overload Type:
- solid state TeSys T
- Product Or Component Type:
- motor starter
- Range Of Product:
- S
- Auxiliary Contact Composition:
- without
- Nema Size:
- 2
- [Uc] Control Circuit Voltage:
- 110 V AC 50 Hz || 120 V AC 60 Hz
- Phase:
- 3 phase
- Depth:
- 125.48 mm
- Warranty:
- 18 months
- Country of Origin:
- Mexico
- Control Type:
- no control units
- [Ue] Rated Operational Voltage:
- 600 V AC
- Poles Description:
- 3P
- Electrical Connection:
- screw clamp terminals
- Rated Power In Hp:
- 10 HP 200 V AC || 15 HP 230 V AC || 25 HP 460 V AC || 25 HP 575 V AC
- Product Certifications:
- UL Listed || CSA || NEMA
- Control Circuit:
- separate control circuit
- Line Rated Current:
- 45 A
- Nema Degree Of Protection:
- not rated (open device)
