Schneider Electric

Schneider Electric 8911DPSG23V09 Starter, Definite Purpose, nonreversing, 25A, 2 pole, 1 phase, 208V to 240V AC coil, melting alloy overload, NEMA 1

(No reviews yet) Write a Review
SKU:
8911DPSG23V09
MPN:
8911DPSG23V09
Condition:
New
Product Or Component Type:
Definite Purpose Starter
Range Of Product:
DPS
Warranty:
18 months
Enclosure Material:
painted sheet steel
Mercury Free:
Yes
Thermal Overload Type:
melting alloy
Phase:
3 phase
Locked Rotor Rated Current:
150 A 230 V AC || 125 A 460 V AC || 100 A 575 V AC
Poles Description:
3P
Maximum Horse Power Rating:
2-2 hp 115 V AC, 1 phase || 5-5 hp 230 V AC, 1 phase || 10-10 hp 230 V AC, 3 phase || 15-15 hp 460 V AC, 3 phase || 20-20 hp 575 V AC, 3 phase
Nema Degree Of Protection:
NEMA 1
Country of Origin:
Mexico
Rohs Exemption Information:
Yes
[Ue] Rated Operational Voltage:
600 V AC
Eu Rohs Directive:
Compliant with Exemptions
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Uc] Control Circuit Voltage:
220 V AC 50 Hz || 208...240 V AC 60 Hz
Line Rated Current:
25 A
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Number Of Thermal Units Required:
3
$412.02

Description

8911 definite purpose starters are inexpensive starters for applications with relatively low duty cycles. Typical applications include air compressors, agricultural equipment, pumps, and HVAC equipment. This three pole definite purpose starter has a full load rating of 25 amperes. This starter has ratings of 2 HP at 115 VAC and 5 HP at 230 VAC single phase. It has a 10 HP at 230 VAC, 15 HP at 460 VAC and 20 HP at 575 VAC poly phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz 220 VAC 50 Hz coil. The starter has straight through wiring. The melting alloy type overload relay uses Type B thermal units to sense over current conditions. A painted sheet steel NEMA 1 general purpose enclosure is used to protect this definite purpose starter. Enclosure is 10.00 inches tall, 6.00 inches wide and 5.56 inches deep. Auxiliary contacts are available for these starters. 8911DPS definite purpose starters are UL component recognized.
View AllClose