Schneider Electric

Schneider Electric A9MEM3250 iEM3250 energy meter - CT - Modbus

(No reviews yet) Write a Review
SKU:
A9MEM3250
MPN:
A9MEM3250
Condition:
New
Ambient Air Temperature For Storage:
-40-85°C
Device Application:
sub billing || partial meter
Relative Humidity:
5-95 % 50-50°C
Measurement Current:
1-32767000 mA
Mounting Support:
DIN rail
Sustainable Offer Status:
Green Premium product
Mounting Mode:
clip-on
Communication Port Support:
screw terminal block RS485
Pollution Degree:
2
Standards:
BS EN 61557-12:2021 || IEC 61557-12:2021 || EN 61557-12:2021 || BS EN 61326-1 || IEC 61326-1 || EN 61326-1 || BS EN 62052-11:2020 || IEC 62052-11:2020 || EN 62052-11:2020 || BS EN 62053-21 || IEC 62053-21 || EN 62053-21 || BS EN 62053-22:2020 || IEC
Type Of Measurement:
active energy || current || voltage || active power
Rohs Exemption Information:
Yes
Display Type:
LCD display
Depth:
69 mm
Maximum Value Measured:
99999999 MWh
Environmental Disclosure:
ENVPEP111276EN
Number Of Outputs:
0
Color:
White
Country of Origin:
China
Device Short Name:
iEM3250
Ip Degree Of Protection:
IP40 front panel: conforming to IEC 60529 || IP20 body: conforming to IEC 60529
Circularity Profile:
ENVEOLI111261EN_V1
Local Signaling:
Green indicator light power ON || Yellow flashing LED accuracy checking || Yellow indicator light communications are active on the Modbus port (Modbus)
Range:
Acti9
Product Or Component Type:
energy meter
Sampling Rate:
32 samples/cycle
Eu Rohs Directive:
Compliant with Exemptions
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
China Rohs Regulation:
X
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
9 Mm Pitches:
10
Line Rated Current:
5 A || 1 A
Product Certifications:
CE IEC 61010-1 safety) || CE EN 61557-12 power monitor) || CE EN/IEC 61326-1 EMC) || UKCA BS EN 61010-1 safety) || UKCA BS EN 61557-12 power monitor) || UKCA BS EN 61326-1 EMC) || cULus UL 61010-1 safety) || cULus EN 61010-1 safety) || EAC sub-meter)
Number Of Inputs:
0
Communication Port Protocol:
Modbus RTU 9.6, 19.2 and 38.4 kbauds even/odd or none 4000 V
Rated Voltage:
100-277 V || 173-480 V
Overvoltage Category:
III
Warranty:
18 months
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Operating Altitude:
< 6561.68 ft (2000 m)
Technology Type:
electronic
Poles Description:
3P || 3P + N || 1P + N
Network Frequency:
50 Hz || 60 Hz
Accuracy Class:
class 0.5S active energy IEC 62053-22 || class 0.5S active energy IEC 61557-12 || class C active energy EN 50470-3
Ambient Air Temperature For Operation:
-25-70°C - IEC
Connections - Terminals:
current circuit screw terminals 6-6 mm² || voltage circuit screw terminals 2.5-2.5 mm²
$633.31

Description

The Acti9 iEM3000 series energy meters offer an attractive range of three-phase DIN rail-mounted energy meters with an LCD display. Additional local signaling includes green LED power-on indicator, flashing yellow LED for accuracy checking and communication indicators. This meter can be used in sub-billing and partial metering applications. The meter provides the following accuracy classes: Active Energy: class 0.5S per IEC 62053-22, and per IEC 61557-12. The meter will measure Active and Reactive Power, Active and Reactive Energy, Voltage and Current. Designed for 50Hz or 60Hz networks, supply voltage can range from 100 to 277VAC or 173 to 480VAC. The rated current goes through a 1A or 5A transfomer to be measured in this meter and will support Single Phase and Neutral, Three Phase and Three Phase and Neutral configurations. Communication protocol is Modbus with screw terminal support. No secondary communication ports. Certifications include EAC, CE and UL. Product dimensions are as follows: width 3.54 in (90 mm), depth 2.72in (69 mm), height 3.74 in (95 mm) and product weight 9.17 oz (260 g). Compatible with power management software to take advantage of the IoT digital power installation.
View AllClose