Schneider Electric

Schneider Electric ATV630U07N4ZU Variable speed drive, Altivar Process ATV600, ATV630, cabinet Integration, IP20, 0,75 kW, 380...480 V, for US

SKU:

ATV630U07N4ZU

UPC:

MPN:

ATV630U07N4ZU

Condition:

New

Motor Slip Compensation:

not available in permanent magnet motor law || can be suppressed || automatic whatever the load || adjustable

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Enclosure Mounting:

with heat sink

Maximum Output Frequency:

500 kHz

Pollution Degree:

2

Quantity Per Set:

1

Net Weight:

3.7 kg

Line Current:

1.5 A 380 V normal duty) || 1.3 A 480 V normal duty) || 0.9 A 380 V heavy duty) || 0.8 A 480 V heavy duty)

Nominal Switching Frequency:

4 kHz

Standards:

UL 508C || EN/IEC 61800-3 || EN/IEC 61800-3 environment 1 category C2 || EN/IEC 61800-3 environment 2 category C3 || EN/IEC 61800-5-1 || IEC 61000-3-12 || IEC 60721-3 || IEC 61508 || IEC 13849-1

Maximum Thdi:

<48 % full load IEC 61000-3-12

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 100000 cycles || configurable relay logic R3 sequence relay NO 100000 cycles

Supply Frequency:

50...60 Hz - 5...5 %

Type Of Polarization:

no impedance

China Rohs Regulation:

X

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Operating Altitude:

<= 3280.84 ft (1000 m) without derating || 1000...4800 m with current derating 1 % per 100 m

Product Or Component Type:

variable speed drive

Insulation Resistance:

> 1 MOhm 500 V DC for 1 minute to earth

Maximum Horse Power Rating:

1 hp normal duty || 0.5 hp heavy duty

Maximum Transient Current:

2.4 A 60 s normal duty) || 2.3 A 60 s heavy duty)

Product Destination:

asynchronous motors || synchronous motors

Discrete Output Number:

0

Ambient Air Temperature For Operation:

-15-50°C without derating) || 50-60°C with derating factor)

Connector Type:

RJ45 on the remote graphic terminal)Ethernet/Modbus TCP || RJ45 on the remote graphic terminal)Modbus serial

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V

Motor Power Kw:

0.75 kW normal duty) || 0.37 kW heavy duty)

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Transmission Frame:

RTU

Marking:

CE

Analogue Input Number:

3

Mounting Mode:

cabinet mount

Discrete And Process Manufacturing:

building - HVAC compressor centrifugal || food and beverage processing other application || mining mineral and metal fan || mining mineral and metal pump || oil and gas fan || water and waste water other application || building - HVAC screw compresso

[Us] Rated Supply Voltage:

380...480 V

Mercury Free:

Yes

Protection Type:

thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c

Safety Function:

STO (safe torque off) SIL 3

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI4) - discrete input || 5 ms +/- 1 ms DI5, DI6) - discrete input || 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input || 10 ms +/- 1 ms AO1) - analog output

Ambient Air Temperature For Storage:

-40-70°C

Operating Position:

vertical +/- 10 degree

Type Of Cooling:

forced convection

Prospective Line Isc:

50 kA

Communication Port Protocol:

Modbus TCP || Ethernet || Modbus serial

Country of Origin:

Indonesia

Linearity Error:

AI1, AI2, AI3 +/- 0.15 % of maximum value analog input || AO1, AO2 +/- 0.2 % analog output

Discrete Input Number:

8

Product Certifications:

TÃœV || ATEX zone 2/22 || CSA || DNV-GL || UL || ATEX INERIS

Noise Level:

54.5 dB 86/188/EEC