DNV-GL || ATEX INERIS || TÃœV || ABS || CSA || UL || Bureau Veritas
Relative Symmetric Network Frequency Tolerance:
0.05
Ambient Air Transport Temperature:
-40-70°C
With Safety Function Safe Torque Off (Sto):
TRUE
Marking:
CE
Sampling Duration:
2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output
Apparent Power:
5.6 kVA 480 V normal duty) || 4.5 kVA 480 V heavy duty)
Ip Degree Of Protection:
IP55
Relative Humidity:
5-95 % without condensation IEC 60068-2-3
Ambient Air Temperature For Storage:
-40-70°C
Protection Type:
thermal protection motor || safe torque off motor || motor phase break motor || thermal protection drive || safe torque off drive || overheating drive || overcurrent between output phases and earth drive || overload of output voltage drive || short-c
Data Format:
8 bits, configurable odd, even or no parity Modbus serial
Quantity Per Set:
1
Prospective Line Isc:
50 kA
4 Quadrant Operation Possible:
TRUE
Sustainable Offer Status:
Green Premium product
Brake Chopper Integrated:
TRUE
Discrete Input Logic:
16 preset speeds
Maximum Thdi:
<48 % full load IEC 61000-3-12
Relay Output Number:
3
Number Of Addresses:
1-247
Permitted Relative Humidity (During Operation):
class 3K5 according to EN 60721-3
Ambient Air Temperature For Operation:
-15-40°C without derating) || 40-50°C with derating factor)
Height:
678 mm
Maximum Output Frequency:
599 Hz
Nominal Switching Frequency:
4 kHz
Analogue Output Type:
software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits || software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Minimum Switching Current:
relay output R1, R2, R3 5 mA 24 V DC
Product Or Component Type:
variable speed drive
Product Specific Application:
process for industrial
Switching Frequency:
2...16 kHz adjustable || 4...16 kHz with derating factor
With Safety Function Safe Stop 1 (Ss1):
TRUE
Electrical Connection:
control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10 || motor screw terminal 4...6 mm² AWG 12...AWG 10 || line side screw terminal 4...6 mm² AWG 12...AWG 10
With Safety Function Safely Limited Position (Slp):
FALSE
Braking To Standstill:
by DC injection
Country of Origin:
China
China Rohs Regulation:
X
Base Load Current At Low Overload:
9.3 A
Environmental Characteristic:
chemical pollution resistance class 3C3 IEC 60721-3-3 || dust pollution resistance class 3S3 IEC 60721-3-3
Vibration Resistance:
1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6
