Schneider Electric

Schneider Electric ATV950U55N4U variable speed drive, Altivar Process ATV900, ATV950, 5.5kW, 7.5hp, 380 to 480V, IP55, UL type 12

SKU:

ATV950U55N4U

UPC:

MPN:

ATV950U55N4U

Condition:

New

Maximum Deflection Under Vibratory Load (During Operation):

1.5 mm at 2...13 Hz

Regulation Loop:

adjustable PID regulator

Apparent Power:

7.6 kVA 480 V normal duty) || 6 kVA 480 V heavy duty)

4 Quadrant Operation Possible:

TRUE

With Safety Function Safely Limited Position (Slp):

FALSE

With Safety Function Safe Position (Sp):

FALSE

Braking To Standstill:

by DC injection

Base Load Current At High Overload:

9.3 A

Synchronous Motor Control Profile:

permanent magnet motor || synchronous reluctance motor

Depth:

272 mm

Input Compatibility:

DI1...DI8 discrete input level 1 PLC IEC 61131-2 || DI7, DI8 pulse input level 1 PLC IEC 65A-68 || STOA, STOB discrete input level 1 PLC IEC 61131-2

Discrete Input Logic:

16 preset speeds

With Safety Function Safe Programmable Logic:

FALSE

Connector Type:

2 RJ45 || 1 RJ45

Assembly Style:

enclosed

Acceleration And Deceleration Ramps:

linear adjustable separately from 0.01...9999 s

With Safety Function Safe Stop 1 (Ss1):

TRUE

Electrical Connection:

control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 || DC bus screw terminal 2.5...6 mm² AWG 14...AWG 10 || motor screw terminal 4...6 mm² AWG 12...AWG 10 || line side screw terminal 4...6 mm² AWG 12...AWG 10

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Noise Level:

52 dB 86/188/EEC

Operating Position:

vertical +/- 10 degree

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Discrete Input Logic:

positive logic (source) DI1...DI8), < 5 V, > 11 V || negative logic (sink) DI1...DI8), > 16 V, < 10 V || positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V || positive logic (source) STOA, STOB), < 5 V, > 11 V

With Safety Function Safe Torque Off (Sto):

TRUE

Ambient Air Temperature For Operation:

-15-40°C without derating) || 40-50°C with derating factor)

Analogue Output Number:

2

Country of Origin:

China

Sampling Duration:

2 ms +/- 0.5 ms DI1...DI8) - discrete input || 5 ms +/- 1 ms DI7, DI8) - pulse input || 1 ms +/- 1 ms AI1, AI2, AI3) - analog input || 5 ms +/- 1 ms AQ1, AQ2) - analog output

Transmission Rate:

10/100 Mbit/s Ethernet IP/Modbus TCP || 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial

Supply:

external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection || internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection || internal supply for d

Prospective Line Isc:

50 kA

Product Specific Application:

process for industrial

Product Or Component Type:

variable speed drive

Base Load Current At Low Overload:

12.7 A

Analogue Input Type:

AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits || AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits

Upgradeability:

Upgraded components available

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Relay Output Type:

configurable relay logic R1 fault relay NO/NC 100000 cycles || configurable relay logic R2 sequence relay NO 1000000 cycles || configurable relay logic R3 sequence relay NO 1000000 cycles

Vibration Resistance:

1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 || 1 gn 13-200 Hz)IEC 60068-2-6

Variant:

standard version || with braking chopper

Environmental Class (During Operation):

class 3C3 according to IEC 60721-3-3 || class 3S3 according to IEC 60721-3-3

Exchange Mode:

half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP

Overvoltage Category:

III

Ip Degree Of Protection:

IP55

Product Certifications:

Bureau Veritas || ATEX INERIS || ABS || CSA || TÃœV || UL || DNV-GL

Asynchronous Motor Control Profile:

optimized torque mode || variable torque standard || constant torque standard

Degree Of Protection:

UL type 12

Width:

264 mm

Minimum Switching Current:

relay output R1, R2, R3 5 mA 24 V DC

Refresh Time:

relay output R1, R2, R3)5 ms +/- 0.5 ms)