Schneider Electric

Schneider Electric BCPMA184S BCPM power monitoring advanced - 84 solid core 100 A - 26 mm CT spacing

(No reviews yet) Write a Review
SKU:
BCPMA184S
MPN:
BCPMA184S
Condition:
New
Relative Humidity:
0-95 % 0-60°C
Measurement Voltage:
90-277 V phase to neutral || 150-480 V phase to phase
Standards:
ANSI C12.1 || IEC 61036 || UL 508 || EN 61010
Provided Equipment:
84 x current transformer || 4 x cables
Net Weight:
1.5 kg
[Us] Rated Supply Voltage:
90...277 V AC 50/60 Hz +/- 1 %
Warranty:
18 months
Type Of Measurement:
voltage || current || frequency || active power || power factor || active energy
Communication Port Protocol:
Modbus RTU
Product Certifications:
UL
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Device Application:
sub billing
Connection Pitch:
26 mm
Sampling Rate:
256 samples/cycle
Power Monitoring:
basic instrumentation
Device Short Name:
BCPMA
Analogue Input Type:
solid core CT 100 A84 x
Weight:
1.5 kg
Range:
PowerLogic
Network Frequency:
50 Hz || 60 Hz
Communication Port Support:
RS485
Rohs Exemption Information:
Yes
Measurement Accuracy:
branch current 2 % 0.25…2 A || branch current 1 % 2…100 A || mains current 3 % 1…100 % || mains current 3 % 2…100 % || voltage 1 % 90…277 V
Power Quality Analysis:
voltage sag and swell detection
Mounting Mode:
panel-mounted
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Communication Of Data:
high current alarm || low current alarm || high-high current alarm || over voltage alarm || low-low current alarm || under voltage alarm
Eu Rohs Directive:
Compliant with Exemptions
Variant:
advanced
Product Name:
PowerLogic BCPM
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Ambient Air Temperature For Storage:
-40-70°C
Mounting Support:
panel || enclosure
China Rohs Regulation:
X
Mercury Free:
Yes
Operating Altitude:
9842.52 ft (3000 m)
Energy Management:
sub billing and cost allocation
Update Time:
1.8 s
Product Or Component Type:
multi-circuit energy meter
Country of Origin:
United States
$12,402.10

Description

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for use in new build and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (100A solid core current transformers) on all branch channels. The BCPM monitors both the 84 branch circuits and mains values, incoming power and energy. All to provide information on the complete Power Distribution Unit. Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. Include 4 21-CTs board strips with 1inch (26mm) spacing between each CT connectors, for 84 circuits. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.
View AllClose