Schneider Electric

Schneider Electric BCPMSCA30S BCPM power monitoring advanced - 30 split core CT 50 A

(No reviews yet) Write a Review
SKU:
BCPMSCA30S
MPN:
BCPMSCA30S
Condition:
New
Net Weight:
1.5 kg
Type Of Measurement:
voltage || current || frequency || active power || power factor || active energy
Energy Management:
sub billing and cost allocation
Mounting Support:
board
Provided Equipment:
2 x cables || 2 x adapter board || 30 x current transformer
Device Short Name:
BCPMSCA
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Power Monitoring:
basic instrumentation
Communication Of Data:
over voltage alarm || high current alarm || low-low current alarm || high-high current alarm || under voltage alarm || low current alarm
Operating Altitude:
9842.52 ft (3000 m)
Variant:
advanced
Rohs Exemption Information:
Yes
Analogue Input Type:
split core CT 0.333 V30 x
Weight:
1.5 kg
Ambient Air Temperature For Storage:
-40-70°C
Relative Humidity:
0-95 % 0-60°C
[Us] Rated Supply Voltage:
90...277 V AC 50/60 Hz +/- 1 %
Device Application:
sub billing
Product Or Component Type:
multi-circuit energy meter
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Product Certifications:
UL
Measurement Accuracy:
branch current 2 % 0.25…2 A || branch current 1 % 2…100 A || mains current 3 % 1…100 % || mains current 3 % 2…100 % || voltage 1 % 90…277 V
Power Quality Analysis:
voltage sag and swell detection
Network Frequency:
50 Hz || 60 Hz
Warranty:
18 months
Sampling Rate:
256 samples/cycle
Mounting Mode:
clip-on
California Proposition 65:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Country of Origin:
United States
Range:
PowerLogic
Update Time:
1.8 s
Product Name:
PowerLogic BCPMSC
Communication Port Support:
RS485
Communication Port Protocol:
Modbus RTU
Standards:
EN 61010 || ANSI C12.1 || UL 508 || IEC 61036
Mercury Free:
Yes
Eu Rohs Directive:
Compliant with Exemptions
Measurement Voltage:
90-277 V phase to neutral || 150-480 V phase to phase
China Rohs Regulation:
X
$8,977.60

Description

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM monitors both the 30 branch circuits and mains values, incoming power and energy. All to provide information on the complete Power Distribution Unit. Adapter boards with terminals for split-core CTs can be mounted using DIN-rail, Snaptrack or on a common mounting plate with the main board Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. Include 50A branch CTs with 2 meters leads and 1.8 meters round ribbon cables, for 30 split-core current transformers. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.
View AllClose