Schneider Electric

Schneider Electric BMECRA31210C EIO drop adapter, Modicon X80, with Ethernet backplane, coated

(No reviews yet) Write a Review
SKU:
BMECRA31210C
MPN:
BMECRA31210C
Condition:
New
Bus Type:
bus X across the remote backplane || Ethernet across the remote backplane
Circularity Profile:
ENVEOLI2402021EN
Environmental Characteristic:
gas resistant class Gx ISA S71.04 || gas resistant class 3C4 IEC 60721-3-3 || dust resistant class 3S4 IEC 60721-3-3 || sand resistant class 3S4 IEC 60721-3-3 || salt resistant level 2 IEC 68252 || mold growth resistant class 3B2 IEC 60721-3-3 || fun
Ambient Air Temperature For Storage:
-40-85°C
Product Certifications:
CE || UL || CSA || RCM || EAC || Merchant Navy || ATEX zone 2/22 || IECEx zone 2/22 || hazardous location class 1, division 2
Operating Altitude:
<= 6561.68 ft (2000 m)
Range Of Product:
Modicon X80
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Relative Humidity:
95-95 % without condensation
Exchange Mode:
half duplex, full duplex, autonegotiation, auto MDIX
Ip Degree Of Protection:
IP20
Port Ethernet:
10/100BASE-TX
Integrated Connection Type:
1 port service or distributed equipment || 2 port Ethernet RIO Network (RSTP)
Connector Type:
3 RJ45
Product Specific Application:
for remote I/O modules
Maximum Altitude Transport:
3000 m
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP2402021EN
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mounting Mode:
rack-mounted
Function Available:
CCOTF (configuration change on the fly) || input data is collected and published to the remote I/O head adaptor || output modules are updated with the data received from remote I/O head adaptor || diagnostics for remote I/O devices (Device DDT) || po
Fixing Mode:
by screws
Standards:
EN/IEC 61131-2 || EN/IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G || EN/IEC 60079-0 || UL 121201 || CSA C22.2 No 213
Protective Treatment:
conformal coating
Communication Port Protocol:
EtherNet/IP
Current Consumption:
1800 mA
Communication Network Type:
IPv4 (internet protocol)
Local Signaling:
for module active (RUN) 1 LED (green) || for module error (ERR) 1 LED (red) || for module status (Mod Status) 1 LED (green/red) || for network communication status (Net Status) 1 LED (green/red) || for Ethernet link diagnostics (STS) 1 LED (green
Country of Origin:
United States
China Rohs Regulation:
X
Weight:
0.225 kg
Cybersecurity:
enable/disable communication ports || Syslog protocol support
Net Weight:
0.225 kg
Device Application:
X80 Ethernet RIO drop adaptor
Topology:
ring
Range Compatibility:
Modicon M580
Input Voltage:
3.3 V DC
Product Or Component Type:
I/O expansion module
Product Compatibility:
0-1024 discrete channel || 0-256 analog channel || counter module || time-stamping module || SSI encoder interface module || motion control module || frequency input module || AS-Interface module || serial link module || fiber converter modul
Transmission Rate:
10/100 Mbit/s
Depth:
87.5 mm
Data Recording:
10 ms time stamps
Number Of Port:
3
Ambient Air Temperature For Operation:
0-60°C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
$2,550.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This Ethernet Remote Input Output (RIO) drop adaptor has 3 ports with Ethernet backplane coated. Integrated connections are EtherNet/IP for device network and EtherNet/IP for service port. Thanks to a protective coating on its circuit board, this product can be used in harsh environments. The input data are collected and published to the remote I/O head adaptor and output modules are updated with the data received from remote I/O head adaptor. It is an IP20 rated product. It is suitable for medium to large process applications. This product is certified by CE, Merchant Navy, GOST, C-Tick. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This adaptor is compatible with multifunction input module BMXERT, Ethernet module BMXNOM, counter module BMXEHC, 0 to 1024 discrete channels, 0 to 256 analogue channels, HART module BMEAH and weighing module PMESWT. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose