Schneider Electric

Schneider Electric BMXAMI0410 analog isolated high level input module, Modicon X80, 4 inputs, 0 to 20mA, 4 to 20mA, 10V positive or negative

(No reviews yet) Write a Review
SKU:
BMXAMI0410
MPN:
BMXAMI0410
Condition:
New
Mtbf Reliability:
1200000 H
Analog/Digital Conversion:
24 bits
Analogue Input Type:
current +/- 20 mA || current 0...20 mA || current 4...20 mA || voltage +/- 10 V || voltage +/- 5 V || voltage 0...10 V || voltage 0...5 V || voltage 1...5 V
Input Level:
high level
Analogue Input Number:
4
Current Consumption:
150 mA 3.3 V DC || 45 mA 24 V DC
Vibration Resistance:
3 gn
Net Weight:
0.143 kg
Digital Value Format:
- 32768 to + 32767 in maximum user scale || +/- 10000 by default
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
China Rohs Regulation:
X
Circularity Profile:
ENVEOLI2311046EN
Input Output Isolation:
isolated
Product Or Component Type:
analog input module
Measurement Resolution:
0.35 mV +/- 10 V || 0.35 mV +/- 5 V || 0.35 mV 0...10 V || 0.35 mV 0...5 V || 0.35 mV 1...5 V || 0.92µA +/- 20 mA || 0.92µA 0...20 mA || 0.92µA 4...20 mA
Warranty:
18 months
Relative Humidity:
5-95 % 55-55°C without condensation
Mercury Free:
Yes
Weight:
0.143 kg
Measurement Error:
<= 0.1 % of full scale +/- 10 V 0...60°C || <= 0.1 % of full scale +/- 5 V 0...60°C || <= 0.1 % of full scale 0...10 V 0...60°C || <= 0.1 % of full scale 0...5 V 0...60°C || <= 0.1 % of full scale 1...5 V 0...60°C || <= 0.3 % of full scale +/- 20 mA
Temperature Drift:
15 ppm/°C +/- 10 V || 15 ppm/°C +/- 5 V || 15 ppm/°C 0...10 V || 15 ppm/°C 0...5 V || 15 ppm/°C 1...5 V || 30 ppm/°C +/- 20 mA || 30 ppm/°C 0...20 mA || 30 ppm/°C 4...20 mA
Type Of Filter:
first order digital filtering
Permitted Overload On Inputs:
+/- 30 V +/- 10 V || +/- 30 V +/- 5 V || +/- 30 V 0...10 V || +/- 30 V 0...5 V || +/- 30 V 1...5 V || +/- 90 mA +/- 20 mA || +/- 90 mA 0...20 mA || +/- 90 mA 4...20 mA
Recalibration:
internal
Electrical Connection:
20 ways 1 connector
Nominal Read Cycle Time:
5 ms for 4 channels
Country of Origin:
France
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Standards:
EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
Common Mode Rejection:
90 dB
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Conversion Value:
+/- 11.4 V +/- 10 V || +/- 11.4 V +/- 5 V || +/- 11.4 V 0...10 V || +/- 11.4 V 0...5 V || +/- 11.4 V 1...5 V || 0...30 mA +/- 20 mA || 0...30 mA 0...20 mA || 0...30 mA 4...20 mA
Input Impedance:
10 MOhm in voltage mode || 250 Ohm + 3.6...50 Ohm internal protective resistor in current mode
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Isolation Voltage:
300 V DC between channels || 1400 V DC between channels and ground || 1400 V DC between channels and bus
Fast Read Cycle Time:
1 ms + 1 ms x number of channels used
Ambient Air Temperature For Storage:
-40-85°C
Ip Degree Of Protection:
IP20
Product Certifications:
CE || RCM || CSA || EAC || Merchant Navy || UL
Minimum Crosstalk Attenuation:
80 dB
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Disclosure:
ENVPEP2311046EN
Ambient Air Temperature For Operation:
0-60°C
Precision Of Internal Conversion Resistor:
0.1 % - 15 ppm/°C
Range Of Product:
Modicon X80
Analogue Input Resolution:
16 bits
Power Consumption In W:
0.82 W 24 V DC typical || 1.30 W 24 V DC maximum || 0.32 W 3.3 V DC typical || 0.48 W 3.3 V DC maximum
Shock Resistance:
30 gn
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$675.00

Description

This high level analog input module is part of the Modicon X80 modules. It has 4 isolated analog inputs (16 bits) and is used with sensors or transmitters. This module is connected via 20-way removable terminal block. It performs monitoring, measurement, and process control functions for continuous processes. The module offers different ranges of voltage or current for each of the inputs depending on configuration choice. It occupies a single slot on the rack and it has a case which provides IP 20 protection of the electronics.
View AllClose