Schneider Electric

Schneider Electric BMXAMI0410H analog isolated high level input module, Modicon X80, 4 I, 0 to 20mA, 4 to 20mA, 10V positive or negative, severe environment

(No reviews yet) Write a Review
SKU:
BMXAMI0410H
MPN:
BMXAMI0410H
Condition:
New
Environmental Disclosure:
ENVPEP2311046EN
Maximum Conversion Value:
+/- 11.4 V +/- 10 V || +/- 11.4 V +/- 5 V || +/- 11.4 V 0...10 V || +/- 11.4 V 0...5 V || +/- 11.4 V 1...5 V || 0...30 mA +/- 20 mA || 0...30 mA 0...20 mA || 0...30 mA 4...20 mA
Current Consumption:
150 mA 3.3 V DC || 45 mA 24 V DC
Minimum Crosstalk Attenuation:
80 dB
Measurement Resolution:
0.35 mV +/- 10 V || 0.35 mV +/- 5 V || 0.35 mV 0...10 V || 0.35 mV 0...5 V || 0.35 mV 1...5 V || 0.92µA +/- 20 mA || 0.92µA 0...20 mA || 0.92µA 4...20 mA
Mtbf Reliability:
1200000 H
Analog/Digital Conversion:
24 bits
Range Of Product:
Modicon X80
Input Level:
high level
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Country of Origin:
United States
Type Of Filter:
first order digital filtering
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2 || hazardous location
Analogue Input Type:
current +/- 20 mA || current 0...20 mA || current 4...20 mA || voltage +/- 10 V || voltage +/- 5 V || voltage 0...10 V || voltage 0...5 V || voltage 1...5 V
Shock Resistance:
30 gn
Common Mode Rejection:
90 dB
Protective Treatment:
conformal coating
Product Certifications:
CE || RCM || CSA || EAC || Merchant Navy || UL || ATEX || IEC-Ex
Temperature Drift:
15 ppm/°C +/- 10 V || 15 ppm/°C +/- 5 V || 15 ppm/°C 0...10 V || 15 ppm/°C 0...5 V || 15 ppm/°C 1...5 V || 30 ppm/°C +/- 20 mA || 30 ppm/°C 0...20 mA || 30 ppm/°C 4...20 mA
Recalibration:
internal
Precision Of Internal Conversion Resistor:
0.1 % - 15 ppm/°C
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electrical Connection:
20 ways 1 connector
Analogue Input Resolution:
16 bits
Isolation Voltage:
300 V DC between channels || 1400 V DC between channels and ground || 1400 V DC between channels and bus
Standards:
EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Nominal Read Cycle Time:
5 ms for 4 channels
China Rohs Regulation:
X
Permitted Overload On Inputs:
+/- 30 V +/- 10 V || +/- 30 V +/- 5 V || +/- 30 V 0...10 V || +/- 30 V 0...5 V || +/- 30 V 1...5 V || +/- 90 mA +/- 20 mA || +/- 90 mA 0...20 mA || +/- 90 mA 4...20 mA
Product Or Component Type:
analog input module
Vibration Resistance:
3 gn
Relative Humidity:
5-95 % 55-55°C without condensation
Circularity Profile:
ENVEOLI2311046EN
Ip Degree Of Protection:
IP20
Power Consumption In W:
0.82 W 24 V DC typical || 1.30 W 24 V DC maximum || 0.32 W 3.3 V DC typical || 0.48 W 3.3 V DC maximum
Weight:
0.143 kg
Analogue Input Number:
4
Ambient Air Temperature For Operation:
-25-70°C
Mercury Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Fast Read Cycle Time:
1 ms + 1 ms x number of channels used
Net Weight:
0.143 kg
Input Impedance:
10 MOhm in voltage mode || 250 Ohm + 3.6...50 Ohm internal protective resistor in current mode
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Input Output Isolation:
isolated
Measurement Error:
0.075 % of full scale +/- 10 V 25°C || 0.075 % of full scale +/- 5 V 25°C || 0.075 % of full scale 0...10 V 25°C || 0.075 % of full scale 0...5 V 25°C || 0.075 % of full scale 1...5 V 25°C || 0.15 % of full scale +/- 20 mA 25°C || 0.15 % of full scal
Ambient Air Temperature For Storage:
-40-85°C
Digital Value Format:
- 32768 to + 32767 in maximum user scale || +/- 10000 by default
$998.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This analogue input module has 4 inputs with 16bit resolution for severe environments. It is an input module with a power consumption of 1.3W at 24V DC. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 20-way connector for electrical connection. It is an IP20 rated product. It weighs 0.143kg. It is suitable for medium to large process and severe environments applications. This product is certified by EAC, RCM, UL, CSA, IEC-Ex, Merchant Navy, ATEX, CE. It meets IEC 61131-2, CSA C22.2 No 142, CSA C22.2 No 213 and UL 508 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose

Related Products

Related Products