Schneider Electric

Schneider Electric BMXAMI0800 analog non isolated high level input module, Modicon X80, 8 inputs, 0 to 20mA, 4 to 20mA, 10V positive or negative

(No reviews yet) Write a Review
SKU:
BMXAMI0800
MPN:
BMXAMI0800
Condition:
New
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
China Rohs Regulation:
X
Shock Resistance:
30 gn
Weight:
0.165 kg
Range Of Product:
Modicon X80
Standards:
EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
Maximum Conversion Value:
+/- 11.4 V +/- 10 V || +/- 11.4 V 0...10 V || +/- 11.4 V 0...5 V || +/- 11.4 V 1...5 V || 0...30 mA +/- 20 mA || 0...30 mA 0...20 mA || 0...30 mA 4...20 mA || 0...30 mA +/- 5 V
Analogue Input Number:
8
Vibration Resistance:
3 gn
Common Mode Rejection:
100 dB
Temperature Drift:
30 ppm/°C +/- 10 V || 30 ppm/°C +/- 5 V || 30 ppm/°C 0...10 V || 30 ppm/°C 0...5 V || 30 ppm/°C 1...5 V || 50 ppm/°C +/- 20 mA || 50 ppm/°C 0...20 mA || 50 ppm/°C 4...20 mA
Measurement Resolution:
0.36 mV +/- 10 V || 0.36 mV 0...10 V || 0.36 mV 0...5 V || 0.36 mV 1...5 V || 0.36 mV +/- 5 V || 1.4µA +/- 20 mA || 1.4µA 0...20 mA || 1.4µA 4...20 mA
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Country of Origin:
Indonesia
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Fast Read Cycle Time:
1 ms + 1 ms x number of channels used
Product Or Component Type:
analog input module
Measurement Error:
<= 0.1 % of full scale +/- 10 V 0...60°C || <= 0.1 % of full scale +/- 5 V 0...60°C || <= 0.1 % of full scale 0...10 V 0...60°C || <= 0.1 % of full scale 0...5 V 0...60°C || <= 0.1 % of full scale 1...5 V 0...60°C || <= 0.3 % of full scale +/- 20 mA
Electrical Connection:
28 ways 1 connector
Permitted Overload On Inputs:
+/- 30 mA 0...20 mA || +/- 30 mA 4...20 mA || +/- 30 V +/- 10 V || +/- 30 V +/- 5 V || +/- 30 V 0...10 V || +/- 30 V 0...5 V || +/- 30 V 1...5 V || +/- 30 mA +/- 20 mA
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Analog/Digital Conversion:
16 bits
Input Output Isolation:
non isolated
Digital Value Format:
- 32768 to + 32767 in maximum user scale || +/- 10000 by default
Nominal Read Cycle Time:
9 ms for 8 channels
Current Consumption:
150 mA 3.3 V DC || 41 mA 24 V DC
Analogue Input Type:
current +/- 20 mA || current 0...20 mA || current 4...20 mA || voltage +/- 10 V || voltage +/- 5 V || voltage 0...10 V || voltage 0...5 V || voltage 1...5 V
Product Certifications:
CE || RCM || CSA || EAC || Merchant Navy || UL
Ip Degree Of Protection:
IP20
Relative Humidity:
5-95 % 55-55°C without condensation
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Net Weight:
0.165 kg
Minimum Crosstalk Attenuation:
80 dB
Precision Of Internal Conversion Resistor:
0.1 % - 15 ppm/°C
Type Of Filter:
first order digital filtering
Power Consumption In W:
0.90 W 24 V DC typical || 1.10 W 24 V DC maximum || 0.32 W 3.3 V DC typical || 0.48 W 3.3 V DC maximum
Environmental Disclosure:
ENVPEP2311046EN
Warranty:
18 months
Input Impedance:
10 MOhm in voltage mode || 250 Ohm in current mode
Circularity Profile:
ENVEOLI2311046EN
Isolation Voltage:
1400 V DC between channels and ground || 1400 V DC between channels and bus || 50 V DC between channels
Analogue Input Resolution:
15 bits + sign
Input Level:
high level
Mercury Free:
Yes
Ambient Air Temperature For Storage:
-40-85°C
Recalibration:
factory calibrated
Ambient Air Temperature For Operation:
0-60°C
Mtbf Reliability:
1700000 H
$644.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This analogue input module has 8 inputs with 15bit + sign input resolution. It is an analogue input module with a power consumption of 1.04W at 24V DC. This product is robust, high quality and based on the latest innovative technology. There is no isolation between channels. It is furnished with 28-way connector for electrical connection. It is an IP20 rated product. It weighs 0.165kg. It is suitable for medium to large process applications. This product is certified by EAC, RCM, UL, CSA, Merchant Navy, CE. It meets IEC 61131-2, CSA C22.2 No 142, CSA C22.2 No 213 and UL 508 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose