Schneider Electric BMXAMO0210H isolated analog output module X80 - 2 outputs - severe
SKU:
BMXAMO0210H
UPC:
MPN:
BMXAMO0210H
Condition:
New
Recalibration:
factory calibrated
Mercury Free:
Yes
Power Consumption In W:
2.1 W 24 V DC typical || 2.8 W 24 V DC maximum || 0.35 W 3.3 V DC typical || 0.48 W 3.3 V DC maximum
Common Mode Rejection:
100Â dB
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Product Certifications:
CE || RCM || CSA || EAC || Merchant Navy || UL || ATEX || IEC-Ex
Measurement Error:
0.1 % of full scale 25°C || <= 0.45 % of full scale - 25...70°C
Conversion Time:
<= 1 ms
Detection Type:
open circuit 0...20 mA || open circuit 4...20 mA || short circuit +/- 10 V
Shock Resistance:
30 gn
Weight:
0.144 kg
Electrical Connection:
20 ways 1 connector
Analogue Output Resolution:
15 bits + sign
Ambient Air Temperature For Operation:
-25-70°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Protective Treatment:
conformal coating
Maximum Conversion Value:
+/- 11.25 V +/- 10 V || 0...24 mA 0...20 mA || 0...24 mA 4...20 mA
China Rohs Regulation:
X
Output Level:
high level
Supply:
internal power supply via rack
Ambient Air Temperature For Storage:
-40-85°C
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Fallback Mode:
configurable || predefined
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Analogue Output Type:
current 0...20 mA || current 4...20 mA || voltage +/- 10 V
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Product Or Component Type:
analog output module
Mtbf Reliability:
1300000 H
Circularity Profile:
ENVEOLI2311046EN
Product Specific Application:
for severe environments
Warranty:
18 months
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2 || hazardous location
Environmental Disclosure:
ENVPEP2311046EN
Ip Degree Of Protection:
IP20
Minimum Crosstalk Attenuation:
90 dB
Country of Origin:
France
Relative Humidity:
5-95 % 55-55°C without condensation
Range Of Product:
Modicon X80
Input Output Isolation:
isolated
Analogue Output Number:
2
Temperature Drift:
30 ppm/°C
Net Weight:
0.144 kg
Standards:
EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
Vibration Resistance:
3 gn
Load Impedance Ohmic:
<= 600 Ohm 0...20 mA || <= 600 Ohm 4...20 mA || >= 1000 Ohm +/- 10 V
Isolation Voltage:
1400 V DC between channels and ground || 1400 V DC between channels and bus || 750 V DC between channels
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This analogue output module has 4 outputs with 15bit +...
This analog output module is part of the Modicon X80 modules. It has 2 isolated high level outputs (15 bits + sign). It offers different ranges of voltage or current for each of the outputs depending...
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This isolated analogue output module has 4 outputs...
