Schneider Electric

Schneider Electric BMXAMO0410H analog isolated high level output module, Modicon X80, 4 O, 0 to 20mA, 4 to 20mA, 10V positive or negative, severe environment

(No reviews yet) Write a Review
SKU:
BMXAMO0410H
MPN:
BMXAMO0410H
Condition:
New
Current Consumption:
150 mA 3.3 V DC || 140 mA 24 V DC
Fallback Mode:
configurable || predefined
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Electrical Connection:
20 ways 1 connector
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Temperature Drift:
45 ppm/°C +/- 10 V || 45 ppm/°C 0...20 mA || 45 ppm/°C 4...20 mA
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2 || hazardous location
Output Level:
high level
Product Or Component Type:
analog output module
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Minimum Crosstalk Attenuation:
80 dB
Ip Degree Of Protection:
IP20
Isolation Voltage:
1400 V DC between channels and ground || 1400 V DC between channels and bus || 750 V DC between channels
Net Weight:
0.15 kg
Analogue Output Type:
current 0...20 mA || current 4...20 mA || voltage +/- 10 V
Power Consumption In W:
3 W 24 V DC typical || 3.6 W 24 V DC maximum || 0.45 W 3.3 V DC typical || 0.51 W 3.3 V DC maximum
Relative Humidity:
5-95 % 55-55°C without condensation
Circularity Profile:
ENVEOLI2311046EN
Measurement Error:
0.1 % of full scale 25°C || <= 0.45 % of full scale - 25...70°C
Analogue Output Number:
4
Range Of Product:
Modicon X80
Environmental Disclosure:
ENVPEP2311046EN
Product Specific Application:
for severe environments
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Mercury Free:
Yes
Warranty:
18 months
Mtbf Reliability:
1000000 H
Detection Type:
open circuit 0...20 mA || open circuit 4...20 mA || short circuit +/- 10 V
Shock Resistance:
30 gn
Supply:
internal power supply via rack
Protective Treatment:
conformal coating
Load Impedance Ohmic:
>= 1000 Ohm +/- 10 V || <= 500 Ohm 0...20 mA || <= 500 Ohm 4...20 mA
Common Mode Rejection:
100 dB
Analogue Output Resolution:
15 bits + sign
China Rohs Regulation:
X
Weight:
0.15 kg
Input Output Isolation:
isolated
Maximum Conversion Value:
0...21 mA 0...20 mA || 0...21 mA 4...20 mA || +/- 10.5 V +/- 10 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Storage:
-40-85°C
Standards:
EN/IEC 61010-2-201 || EN/IEC 61131-2 || UL 61010-2-201 || CSA C22.2 No 61010-2-201
Country of Origin:
France
Conversion Time:
<= 1 ms
Product Certifications:
CE || RCM || CSA || EAC || Merchant Navy || UL || ATEX || IEC-Ex
Vibration Resistance:
3 gn
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ambient Air Temperature For Operation:
-25-70°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
$1,200.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This isolated analogue output module has 4 outputs with 15bit + sign resolution. It is an output module which work with internal power supply via rack. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 20-way connector for electrical connection. It is an IP20 rated product. It weighs 0.15kg. It is suitable for severe environments, medium to large process applications. This product is certified by IEC-Ex, ATEX, EAC, Merchant Navy, CSA, RCM, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose