Schneider Electric

Schneider Electric BMXART0814H analog isolated low level input module, Modicon X80, 8 inputs, 40mV positive or negative, for severe environments

(No reviews yet) Write a Review
SKU:
BMXART0814H
MPN:
BMXART0814H
Condition:
New
Shock Resistance:
30 gn
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Net Weight:
0.165 kg
Weight:
0.165 kg
Analogue Input Resolution:
15 bits + sign
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Common Mode Rejection:
120 dB 50/60 Hz
Permitted Overload On Inputs:
+/- 7.5 V +/- 1.28 V || +/- 7.5 V +/- 160 mV || +/- 7.5 V +/- 320 mV || +/- 7.5 V +/- 40 mV || +/- 7.5 V +/- 640 mV || +/- 7.5 V +/- 80 mV
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Relative Humidity:
5-95 % 55-55°C without condensation
Analogue Input Type:
voltage +/- 1.28 V || voltage +/- 160 mV || voltage +/- 320 mV || voltage +/- 40 mV || voltage +/- 640 mV || voltage +/- 80 mV || resistor 400 Ohm 2 wires || resistor 400 Ohm 3 wires || resistor 400 Ohm 4 wires || resistor 4000 Ohm 2 wires || resisto
Mtbf Reliability:
900000 H
Nominal Read Cycle Time:
400 ms with temperature probe || 200 ms with thermocouple
Input Output Isolation:
isolated
Product Or Component Type:
analog input module
Country of Origin:
United States
Protective Treatment:
conformal coating
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Input Level:
low level
Product Certifications:
CSA || UL || IEC-Ex || CE || Merchant Navy || RCM || ATEX || EAC
Maximum Wiring Resistance:
20 Ohm 2 wires Cu 10 || 20 Ohm 2 wires Ni 100 || 20 Ohm 2 wires Pt 100 || 20 Ohm 3 wires Cu 10 || 20 Ohm 3 wires Ni 100 || 20 Ohm 3 wires Pt 100 || 200 Ohm 2 wires Ni 1000 || 200 Ohm 2 wires Pt 1000 || 200 Ohm 3 wires Ni 1000 || 200 Ohm 3 wires Pt 10
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2 || hazardous location class I division 2
Type Of Filter:
first order digital filtering
Environmental Disclosure:
ENVPEP2311046EN
Standards:
IEC 61131-2 || IEC 61000-6-4 || IEC 61000-6-2 || EN 61010-2-201
China Rohs Regulation:
X
Differential Mode Rejection:
60 dB 50/60 Hz
Product Specific Application:
for severe environments
Recalibration:
internal
Temperature Drift:
25 ppm/°C 400 Ohm || 25 ppm/°C 4000 Ohm || 25 ppm/°C Ni 1000 || 25 ppm/°C thermocouple B || 25 ppm/°C thermocouple E || 25 ppm/°C thermocouple J || 25 ppm/°C thermocouple K || 25 ppm/°C thermocouple L || 25 ppm/°C thermocouple N || 25 ppm/°
Detection Type:
open circuit Cu 10 || open circuit Ni 100 || open circuit Ni 1000 || open circuit Pt 100 || open circuit Pt 1000 || open circuit thermocouple B || open circuit thermocouple E || open circuit thermocouple J || open circuit thermocouple K || open circu
Electrical Connection:
40 ways 2 connectors
Ip Degree Of Protection:
IP20
Measurement Resolution:
0.1°C Cu 10 || 0.1°C Ni 100 || 0.1°C Ni 1000 || 0.1°C Pt 100 || 0.1°C Pt 1000 || 0.1°C thermocouple B || 0.1°C thermocouple E || 0.1°C thermocouple J || 0.1°C thermocouple K || 0.1°C thermocouple L || 0.1°C thermocouple N || 0.1°C thermocouple R || 0
Measurement Error:
+/- 0.7°C Ni 1000 25°C || +/- 2.1°C Ni 100 25°C || +/- 2.1°C Pt 100 25°C || +/- 2.1°C Pt 1000 25°C || +/- 2.7°C thermocouple U 25°C || +/- 2.8°C thermocouple J 25°C || +/- 3°C thermocouple L 25°C || +/- 3.2°C thermocouple R 25°C || +/- 3.2°C thermoco
Mercury Free:
Yes
Warranty:
18 months
Ambient Air Temperature For Operation:
-25-70°C
Maximum Conversion Value:
+/- 100 % 400 Ohm || +/- 100 % 4000 Ohm || +/- 102.5 % +/- 1.28 V || +/- 102.5 % +/- 160 mV || +/- 102.5 % +/- 320 mV || +/- 102.5 % +/- 40 mV || +/- 102.5 % +/- 640 mV || +/- 102.5 % +/- 80 mV
Analog/Digital Conversion:
sigma delta 16 bits
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Analogue Input Number:
8
Cold Junction Compensation:
external by Pt100 probe
Circularity Profile:
ENVEOLI2311046EN
Ambient Air Temperature For Storage:
-40-85°C
Vibration Resistance:
3 gn
Current Consumption:
150 mA 3.3 V DC || 50 mA 24 V DC
Range Of Product:
Modicon X80
$1,878.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This analogue input module has 8 inputs with 15bit + sign input resolution. It is an analogue input module with a current consumption of 150mA at 3.3V DC. There is an isolation between channels. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 40-way connector for electrical connection. It is an IP20 rated product. It weighs 0.165kg. It is suitable for medium to large process and severe environments applications. This product is certified by EAC, RCM, UL, CSA, IEC-Ex, Merchant Navy, ATEX, CE. It meets IEC 61131-2, CSA C22.2 No 142, CSA C22.2 No 213 and UL 508 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose