Schneider Electric

Schneider Electric BMXCPS3020 power supply module, Modicon X80, 24 to 48V DC, 31.2W

(No reviews yet) Write a Review
SKU:
BMXCPS3020
MPN:
BMXCPS3020
Condition:
New
Ip Degree Of Protection:
IP20
Protection Type:
internal fuse not accessible primary circuit || overload protection secondary circuit, 24 V sensor power supply || overvoltage protection secondary circuit, 24 V sensor power supply || short-circuit protection secondary circuit, 24 V sensor power sup
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Input Current:
0.83 A 48 V || 1.65 A 24 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
X
Ambient Air Temperature For Storage:
-40-85°C
Environmental Disclosure:
ENVPEP2402022EN
Inrush Current:
30 A 24 V || 60 A 48 V
Control Type:
RESET push-button cold restart
Vibration Resistance:
3 gn
Range Of Product:
Modicon X80
Relative Humidity:
5-95 % 55-55°C without condensation
Country of Origin:
France
Ambient Air Temperature For Operation:
0-60°C
Supply Circuit Type:
DC
Maximum Cable Distance Between Devices:
10 m power supply cable copper 1.5 mm² || 15 m power supply cable copper 2.5 mm²
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI2402022EN
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Mtbf Reliability:
4600000 H
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Sustainable Offer Status:
Green Premium product
Insulation Resistance:
>= 10 MOhm primary/ground || >= 10 MOhm primary/secondary
Mercury Free:
Yes
It On Activation:
0.2 A.s 24 V || 0.3 A.s 48 V
Warranty:
18 months
Maximum Power Dissipation In W:
8.5 W
Current At Secondary Voltage:
1.3 A 24 V DC I/O module power supply and processor || 4.5 A 3.3 V DC I/O module logic power supply
Product Or Component Type:
power supply module
Net Weight:
0.34 kg
Protective Treatment:
TC
Primary Voltage Limit:
18...62.4 V
Electrical Connection:
1 connector 2 alarm relay || 1 connector 5 line supply, protective earth
Product Compatibility:
not compatible with BMEXBP..02
Immunity To Microbreaks:
1 ms
Weight:
0.34 kg
Shock Resistance:
30 gn
Status Led:
1 LED (Green) rack voltage OK
Primary Voltage:
24...48 V isolated
Rohs Exemption Information:
Yes
I²T On Activation:
1 A².s 24 V || 3 A².s 48 V
Dielectric Strength:
1500 V primary/ground || 1500 V primary/secondary
Secondary Power:
15 W 3.3 V DC I/O module logic power supply || 31.2 W 24 V DC I/O module power supply and processor
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
$818.00

Description

This power module is part of the Modicon X80 modules. This module provides the power supply for each Modicon X80 I/O rack and the modules installed. It is supplied with 24V to 48V DC isolated. It has a case which provides IP 20 protection of the electronics.
View AllClose