Schneider Electric

Schneider Electric BMXCPS3522 redundant power supply module, Modicon X80, 125V DC

SKU:

BMXCPS3522

UPC:

MPN:

BMXCPS3522

Condition:

New

Protection Type:

internal fuse not accessible primary circuit || overload protection secondary circuit || overvoltage protection secondary circuit || short-circuit protection secondary circuit

Mtbf Reliability:

830000 H

China Rohs Regulation:

X

Supply Circuit Type:

DC

Maximum Power Dissipation In W:

8.5 W

Country of Origin:

Indonesia

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Immunity To Microbreaks:

1 ms

Weight:

0.61 kg

Environmental Characteristic:

3C3 IEC 60721-3-3 || 3C4 IEC 60721-3-3

Mercury Free:

Yes

Status Led:

1 LED (Green) presence of voltages (OK) || 1 LED (Green) redundancy OK || 1 LED (Green) power supply status

Electrical Connection:

1 connector 2 alarm relay || 1 connector 5 line supply, protective earth

Ambient Air Temperature For Storage:

-40-85°C

Secondary Power:

18 W 3.3 V DC 0-60°C I/O module logic power supply || 40 W 24 V DC 0-60°C I/O module power supply and processor if 3.3 V not loaded

Function Available:

uptime duration || temperature sensing || remaining lifetime || redundancy information || redundancy test

Net Weight:

0.61 kg

Inrush Current:

60 A 125 V

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ambient Air Temperature For Operation:

0-60°C

Primary Voltage Limit:

100...150 V

Input Current:

600 mA 125 V

Control Type:

RESET push-button cold restart

Range Of Product:

Modicon X80

It On Activation:

0.09 A.s 125 V

I²T On Activation:

2.5 A².s 125 V

Insulation Resistance:

>= 100 MOhm primary/ground || >= 100 MOhm primary/secondary

Current At Secondary Voltage:

1.67 A 24 V DC I/O module power supply and processor || 5 A 3.3 V DC I/O module logic power supply

Directives:

2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility

Ip Degree Of Protection:

IP20

Primary Voltage:

125 V

Dielectric Strength:

1500 V primary/secondary I/O module logic power supply || 1500 V primary/secondary I/O module power supply and processor || 2300 V primary/secondary sensor power supply || 1500 V primary/ground

Relative Humidity:

10-95 % without condensation

Product Compatibility:

all backplane

Product Or Component Type:

power supply module

Rohs Exemption Information:

Yes