Schneider Electric

Schneider Electric BMXCPS3522S redundant power supply module X80 - 125 V DC - Safety

(No reviews yet) Write a Review
SKU:
BMXCPS3522S
MPN:
BMXCPS3522S
Condition:
New
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Immunity To Microbreaks:
1 ms
Rohs Exemption Information:
Yes
Mtbf Reliability:
791000 H
Net Weight:
0.64 kg
Control Type:
RESET push-button cold restart
Electrical Connection:
1 connector 2 alarm relay || 1 connector 5 line supply, protective earth
Inrush Current:
60 A 125 V
Protective Treatment:
conformal coating
Input Current:
600 A 125 V
Environmental Characteristic:
hazardous location class I division 2 || gas resistant class Gx ISA S71.04 || gas resistant class 3C4 IEC 60721-3-3 || dust resistant class 3S4 IEC 60721-3-3 || sand resistant class 3S4 IEC 60721-3-3 || salt resistant level 2 IEC 68252 || mold growth
Mercury Free:
Yes
Ambient Air Temperature For Storage:
-40-85°C
Insulation Resistance:
>= 100 MOhm primary/ground || >= 100 MOhm primary/secondary
Weight:
0.64 kg
Country of Origin:
United States
Directives:
2014/30/EU - electromagnetic compatibility || 2006/42/EC - machinery || 2014/34/EU - ATEX directive
Ambient Air Temperature For Operation:
-25-60°C
Product Certifications:
CE || UL || CSA || RCM || EAC || Merchant Navy || ATEX zone 2/22 || IECEx zone 2/22 || TÃœV
Relative Humidity:
5-95 % 55-55°C without condensation
Dielectric Strength:
1500 V primary/secondary I/O module logic power supply || 1500 V primary/secondary I/O module power supply and processor || 2300 V primary/secondary sensor power supply || 1500 V primary/ground
Range Of Product:
Modicon X80
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Supply Circuit Type:
DC
I²T On Activation:
2.5 A².s 125 V
Maximum Power Dissipation In W:
8.5 W
Function Available:
redundancy information || redundancy test || remaining lifetime || temperature sensing || uptime duration
Secondary Power:
18 W 3.3 V DC -25-60°C I/O module logic power supply || 40 W 24 V DC -25-60°C I/O module power supply and processor if 3.3 V not loaded
Protection Type:
internal fuse not accessible primary circuit || overload protection secondary circuit || overvoltage protection secondary circuit || short-circuit protection secondary circuit
Product Compatibility:
all backplane
It On Activation:
0.09 A.s 125 V
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ip Degree Of Protection:
IP20
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Current At Secondary Voltage:
1.67 A 24 V DC I/O module logic power supply || 5 A 3.3 V DC I/O module power supply and processor
Standards:
EN/IEC 61131-2 || EN/IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G || EN/IEC 60079-0
Primary Voltage Limit:
100...150 V
Status Led:
1 LED (Green) presence of voltages (OK) || 1 LED (Green) redundancy OK || 1 LED (Green) power supply status
Product Or Component Type:
power supply module
China Rohs Regulation:
X
Shock Resistance:
15 gn
Vibration Resistance:
3 gn
Primary Voltage:
125 V
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
$1,750.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). On the front face of the power supply, 2 connectors (2-way and 5-way) can take a removable terminal block. It converts 100…150 V DC current into 24 V DC and 3.3 V DC output voltages, distributed over the backplane. This safety power supply can provide advanced diagnostics that simplify maintenance by predicting when to replace power supply before it fails. It detects overvoltage, overload, and short-circuit conditions on 24 V DC and 3.3 V DC backplane lines. It can be installed in any rack, main or extended local rack, main or extended remote rack. It has a red coating specific to Safety products. For high-availability applications, two independent redundant power supplies can be used to increase the security of the power supply. This product is certified by CE and UL, and also by ATEX and IECEx for use in explosive atmospheres. The safety power supply is compatible with Modicon STB terminal for grounding kit. A set of two caged removable terminal blocks (5-way and 2-way) is included in the power supply package. The power supply has to be inserted in the leftmost dedicated slots on each rack (marked CPS). Modicon X80 is a platform of modules common to Modicon M580 and M340 automation platforms that reduces maintenance and training costs with same spare parts in stock, and unique training for various Programmable Automation Controllers (PAC). Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose

Related Products

Related Products