Schneider Electric

Schneider Electric BMXCPS4002H power supply module, Modicon X80, 100 to 240V AC, for severe environment

(No reviews yet) Write a Review
SKU:
BMXCPS4002H
MPN:
BMXCPS4002H
Condition:
New
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Electrical Connection:
1 connector 2 alarm relay || 1 connector 5 line supply, protective earth
Vibration Resistance:
3 gn
I²T On Activation:
1 A².s 120 V || 3 A².s 240 V
Network Frequency:
50/60 Hz
Maximum Power Dissipation In W:
8.5 W
Dielectric Strength:
1500 V primary/secondary I/O module logic power supply || 1500 V primary/secondary I/O module power supply and processor || 2300 V primary/secondary sensor power supply || 1500 V primary/ground || 500 V 24 V sensor output/ground
Inrush Current:
30 A 120 V || 60 A 240 V
Range Of Product:
Modicon X80
Status Led:
1 LED (Green) presence of voltages (OK) || 1 LED (Green) redundancy OK || 1 LED (Green) power supply status
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Insulation Resistance:
>= 100 MOhm primary/ground || >= 100 MOhm primary/secondary
Standards:
IEC 61131-2 || IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G
It On Activation:
0.05 A.s 120 V || 0.07 A.s 240 V
Current At Secondary Voltage:
5.5 A 3.3 V DC I/O module logic power supply || 1.67 A 24 V DC I/O module power supply and processor
Product Compatibility:
all backplane
Immunity To Microbreaks:
1 ms
Rohs Exemption Information:
Yes
Relative Humidity:
5-95 % 55-55°C without condensation
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Control Type:
RESET push-button cold restart
Mtbf Reliability:
792000 H
Primary Voltage:
100...240 V
Protection Type:
internal fuse not accessible primary circuit || overload protection secondary circuit || overvoltage protection secondary circuit || short-circuit protection secondary circuit
Mercury Free:
Yes
Shock Resistance:
30 gn
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Operation:
-25-70°C
Ip Degree Of Protection:
IP20
Network Frequency Limits:
47-63 Hz
Primary Voltage Limit:
85...264 V
Protective Treatment:
conformal coating
Country of Origin:
Indonesia
Product Or Component Type:
power supply module
Input Current:
0.55 A 240 V || 1.01 A 115 V
Product Specific Application:
for severe environments
Weight:
0.51 kg
Apparent Power:
0.13 kVA
Secondary Power:
18 W 3.3 V DC -25-70°C I/O module logic power supply || 40 W 24 V DC -25-70°C I/O module power supply and processor if 3.3 V not loaded
Environmental Characteristic:
gas resistant class Gx ISA S71.04 || gas resistant class 3C4 IEC 60721-3-3 || dust resistant class 3S4 IEC 60721-3-3 || sand resistant class 3S4 IEC 60721-3-3 || salt resistant level 2 IEC 68252 || mold growth resistant class 3B2 IEC 60721-3-3 || fun
China Rohs Regulation:
X
Supply Circuit Type:
AC
Ambient Air Temperature For Storage:
-40-85°C
Net Weight:
0.51 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Function Available:
remaining lifetime || temperature sensing || redundancy test || redundancy information || uptime duration
Product Certifications:
CE || UL || CSA || RCM || EAC || Merchant Navy
$2,000.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This power supply module has a primary voltage of 100V to 240V AC for severe environments. It is a power supply module with a secondary power of 40W at 24V DC, a current at secondary voltage of 5.5A at 3.3V DC and a maximum power dissipation of 8.5W. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. It is furnished with 2-pin connector for alarm relay, 5-pin connector for line supply, protective earth for electrical connection. Advanced diagnostics available via networks are temperature sensing, redundancy test, uptime duration, redundancy information and remaining lifetime. It is an IP20 rated product. It weighs 0.51kg. It is suitable for medium to large process applications. This product is certified by ATEX, IEC-Ex, CE, RCM, Merchant Navy, CSA, EAC, UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. This product is compatible with all backplane. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose