Schneider Electric

Schneider Electric BMXCPS4002S redundant power supply module, Modicon X80, 100 to 240V AC, safety

(No reviews yet) Write a Review
SKU:
BMXCPS4002S
MPN:
BMXCPS4002S
Condition:
New
Dielectric Strength:
1500 V primary/secondary I/O module logic power supply || 1500 V primary/secondary I/O module power supply and processor || 2300 V primary/secondary sensor power supply || 1500 V primary/ground || 500 V 24 V sensor output/ground
Weight:
0.51 kg
Primary Voltage Limit:
85...264 V
Input Current:
0.55 A 230 V || 1.1 A 115 V
Product Or Component Type:
power supply module
Directives:
2014/30/EU - electromagnetic compatibility || 2006/42/EC - machinery || 2014/34/EU - ATEX directive
Ambient Air Temperature For Operation:
-25-60°C
Environmental Characteristic:
hazardous location class I division 2 || gas resistant class Gx ISA S71.04 || gas resistant class 3C4 IEC 60721-3-3 || dust resistant class 3S4 IEC 60721-3-3 || sand resistant class 3S4 IEC 60721-3-3 || salt resistant level 2 IEC 68252 || mold growth
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Network Frequency Limits:
47-63 Hz
Maximum Power Dissipation In W:
8.5 W
Product Certifications:
CE || UL || CSA || RCM || EAC || Merchant Navy || ATEX zone 2/22 || IECEx zone 2/22 || TÃœV
Status Led:
1 LED (Green) presence of voltages (OK) || 1 LED (Green) redundancy OK || 1 LED (Green) power supply status
Range Of Product:
Modicon X80
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Relative Humidity:
5-95 % 55-55°C without condensation
Ip Degree Of Protection:
IP20
Standards:
EN/IEC 61131-2 || EN/IEC 61010-2-201 || UL 61010-2-201 || CSA C22.2 No 61010-2-201 || IACS E10 || EN/IEC 61000-6-5, interface type 1 and type 2 || EN/IEC 61850-3, location G || EN/IEC 60079-0
Secondary Power:
15 W 3.3 V DC -25-60°C I/O module logic power supply || 40 W 24 V DC -25-60°C I/O module power supply and processor if 3.3 V not loaded
Insulation Resistance:
>= 100 MOhm primary/ground || >= 100 MOhm primary/secondary
Mtbf Reliability:
792000 H
Protection Type:
internal fuse not accessible primary circuit || overload protection secondary circuit || overvoltage protection secondary circuit || short-circuit protection secondary circuit
Electrical Connection:
1 connector 2 alarm relay || 1 connector 5 line supply, protective earth
Vibration Resistance:
3 gn
Current At Secondary Voltage:
4.5 A 3.3 V DC I/O module logic power supply || 1.67 A 24 V DC I/O module power supply and processor
Protective Treatment:
conformal coating
Network Frequency:
50/60 Hz
China Rohs Regulation:
X
It On Activation:
0.1 A.s 115 V || 0.15 A.s 230 V
Supply Circuit Type:
AC
Net Weight:
0.51 kg
Product Compatibility:
all backplane
Ambient Air Temperature For Storage:
-40-85°C
I²T On Activation:
1 A².s 115 V || 4 A².s 230 V
Inrush Current:
30 A 115 V || 60 A 230 V
Immunity To Microbreaks:
10 ms
Shock Resistance:
15 gn
Control Type:
RESET push-button cold restart
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Apparent Power:
0.13 kVA
Function Available:
redundancy information || redundancy test || temperature sensing || remaining lifetime || uptime duration
Country of Origin:
Indonesia
Primary Voltage:
100...240 V
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
$2,200.00

Description

This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This power supply module with a primary voltage of 100V to 240V AC. It is a power supply module with a secondary power of 40W at 24V DC, a current at secondary voltage of 4.5A at 3.3V DC and a maximum power dissipation of 8.5W. This product is robust, high quality and based on the latest innovative technology. It is furnished with 2-pin connector for alarm relay, 5-pin connector for line supply, protective earth for electrical connection. It is an IP20 rated product. It weighs 0.51kg. It is suitable for medium to large process applications. This product is certified by CE, RCM, Merchant Navy, CSA, EAC and UL. It meets EN 61131-2, EN 61000-6-5, EN 61850-3 and EN 61010-2-201 standards. This product is compatible with all backplane. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.
View AllClose