Schneider Electric BMXDDM16022H discrete I/O module X80 - 8 I - 24 V DC - 8 O - solid state- severe
SKU:
BMXDDM16022H
UPC:
MPN:
BMXDDM16022H
Condition:
New
Maximum Overload Time:
15 ms
Input Compatibility:
with 2-wire/3-wire proximity sensors IEC 60947-5-2 || with 2-wire/3-wire proximity sensors IEC 61131-2 type 3
Discrete Output Current:
0.5 A
Voltage Detection Threshold:
< 14 V DC preactuator fault || < 14 V DC sensor fault || > 18 V DC preactuator OK || > 18 V DC sensor OK
Current State 0 Guaranteed:
<= 1.5 mA
Current Per Channel:
0.55 A 70°C || 0.625 A 60°C
Output Overvoltage Protection:
with transil diode
Mercury Free:
Yes
Country of Origin:
United States
Input Impedance:
6800 Ohm
Discrete Output Number:
8
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Weight:
0.115 kg
Response Time On Output:
1.2 ms
Current State 1 Guaranteed:
>= 3 mA
Discrete Output Type:
solid state
Maximum Voltage Drop:
<1.2 V at state 1
Net Weight:
0.115 kg
Product Specific Application:
for severe environments
Current Consumption:
<= 111 mA 3.3 V DC || <= 67 mA 24 V DC
Protection Type:
1 external fuse per group of input channel 0.5 A fast blow || overvoltage protection on output || reverse polarity protection on input || reverse polarity protection on output
Load Impedance Ohmic:
>= 48 Ohm
Voltage Range:
21.1...29.0 V 70°C || 19...30 V 60°C
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Relative Humidity:
5-95 % 55-55°C without condensation
Dielectric Strength:
1500 V AC 50/60 Hz 1 minute, output/ground || 1500 V AC 50/60 Hz 1 minute, output/internal logic || 1500 V AC 50/60 Hz 1 minute, primary/secondary || 500 V DC 1 minute, between group of inputs and outputs
Insulation Resistance:
> 10 MOhm 500 V DC
Input Type:
current sink (logic positive)
Discrete Output Voltage:
24 V 19...30 V DC 60°C || 24 V 26.4 V DC 70°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Maximum Current Per Module:
5 A 60°C || 4.4 A 70°C
Dc Typical Filtering Time:
4 ms
Discrete Input Current:
3.5 mA
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Range Of Product:
Modicon X80
Output Short-Circuit Protection:
with 2 A external fuse
Ip Degree Of Protection:
IP20
Output Overload Protection:
with electronic circuit breaker 1.5 In < Id < 2 In || with current limiter
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
Status Led:
1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
This Schneider Electric Zelio Logic SR3 Discrete I/O Extension Module Smart Relays uses a supply voltage of 24 volts alternating current, has 6 inputs / outputs contact with screw-clamp terminals...
This product is part of the Modicon Momentum range, an offer of controller and IP20 monoblock I/Os for distributed control architecture. This discrete I/O module has 1 group of 16 inputs and 2 groups...
